Is the DKL 90Â° hydraulic end, type ZMW211, light series, carbon steel compatible with standard crimping sleeves for industrial hydraulic hoses?

Yes. The DKL 90Â° hydraulic end, type ZMW211, light series, carbon steel is compatible with standard crimping sleeves for industrial hydraulic hoses . provided the sleeve is matched to the hose type and dimensions. The product description explicitly states it is designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Ensure the sleeve and crimping die correspond to the hose inner/outer diameter, reinforcement layer, and operating pressure class; also verify the nut/thread dimensions and tail geometry match the hose assembly procedure. When those matches are confirmed, a standard crimping sleeve appropriate for the hose can be used with the ZMW211 fitting.

Can the DKL 90Â° hydraulic end, type ZMW211, light series, carbon steel be used with polyurethane or thermoplastic hose assemblies?

Yes. The DKL 90Â° hydraulic end, type ZMW211, light series, carbon steel can be used with polyurethane or thermoplastic hose assemblies provided the correct crimping sleeve and crimping process for those hose materials are used. The fitting is designed for crimping into hydraulic and industrial hoses using a sleeve suitable for the hose type; ensure the sleeve profile and crimping parameters match the polyurethane or thermoplastic hose manufacturerâs specifications. Also verify compatibility of the metal-metal sealing and the hoseâs pressure, temperature, and chemical resistance ratings with the DKL 24Â°/60Â° cone and the intended application.

Does the DKL 90Â° hydraulic end, type ZMW211, light series, carbon steel require a specific torque for nut tightening?

DKL 90Â° hydraulic end, type ZMW211, light series, carbon steel Format; Based on the provided description (standard hydraulic end fitting type Z, internal metric thread and nut, metal-to-metal sealing, universal cone 24Â°/60Â°, 90Â° angled, lightweight series, for crimping with compatible crimping sleeve, carbon steel, galvanized), a specific nut-tightening torque is not specified. These fittings are intended to be assembled by crimping the hose end with a correctly sized crimping sleeve using the proper crimping machine and die set for the hose type; the crimping process secures the fitting to the hose and is the primary means of attachment, not manual nut torque. However, if the fitting is used in an assembly where the nut must be tightened onto a mating component (e.g., during initial assembly or test), you should follow these guidelines: - Use the torque value recommended by the hose, crimp sleeve, or fitting manufacturer or the equipment OEM. They may publish torque specs for any threaded connections in their assembly procedures. - If no manufacturer torque is available, use good-practice hand-tightening plus a controlled additional quarter- to half-turn with a calibrated torque wrench appropriate for the nut size and thread class, avoiding excessive preload that could deform the metal-to-metal cone sealing surface. - Inspect the metal-to-metal sealing face for correct engagement and absence of damage; leaks or damage indicate improper assembly or excessive torque. - When in doubt, contact the fitting or hose supplier for the exact torque spec or assembly instructions. Summary: No specific torque is given in the descriptionâcrimping is the designed assembly method. For threaded nut tightening, follow manufacturer/OEM torque data; if unavailable, use conservative, controlled tightening and verify seal engagement, or consult the supplier.

Embout hydraulique DKL 90°, type ZMW211, série légère, acier au carbone

Informations complémentaires

Matériau	CS – acier (fonte)

Embout hydraulique standard (type Z – avec « queue » hydraulique classique pour flexible), avec filetage métrique interne et écrou, étanchéité métal-métal, cône universel 24°/60° (DKL), coudé à 90°, série légère. Conçu pour le sertissage sur flexibles hydrauliques et industriels à l’aide d’une bague de sertissage adaptée au type de flexible. Matière : acier au carbone, galvanisé.

Liste des variantes de produit

Référence article	Nom de la variante du produit	DN	BAR	Disponibilité	Actions
TI-ZMW211-12-04	Embout 90° GF M12x1,5, tuyau 1/4", 24/60°, léger	6	-	En stock	Demande
TI-ZMW211-14-04	Raccord coudé 90° femelle M14x1,5, tuyau 1/4", 24/60°, léger	6	-	En stock	Demande
TI-ZMW211-16-04	Raccord coudé 90° femelle M16x1,5, tuyau 1/4", 24/60°, léger	6	-	En stock	Demande
TI-ZMW211-16-05	Raccord final à 90° femelle M16x1,5, tuyau 5/16", 24/60°, léger	8	-	En stock	Demande
TI-ZMW211-16-06	Extrémité 90° FI M16x1,5, tuyau 3/8", 24/60°, léger	10	-	En stock	Demande
TI-ZMW211-18-05	Coude 90° MF M18x1,5, flexible 5/16", 24/60°, léger	8	-	En stock	Demande
TI-ZMW211-18-06	Embout coudé 90°, filetage femelle M18x1,5, tuyau 3/8", 24/60°, léger	10	-	En stock	Demande
TI-ZMW211-22-06	Raccord coudé 90° femelle M22x1,5, flexible 3/8", 24/60°, léger	10	-	En stock	Demande
TI-ZMW211-22-08	Embout coudé 90° FF M22x1,5, flexible 1/2", 24/60°, léger	12	-	En stock	Demande
TI-ZMW211-22X16L-08	Embout coudé 90° F M22x1,5, 16L, tuyau 1/2", 24/60, léger	12	-	En stock	Demande
TI-ZMW211-26-10	Coude 90° filetage femelle M26x1,5, tuyau 5/8", 24/60°, léger	16	-	En stock	Demande
TI-ZMW211-27-10	Extrémité 90° femelle M27x2, tuyau 5/8", 24/60°, légère	16	-	En stock	Demande
TI-ZMW211-27X1,5-10	Terminal 90°, filetage femelle M27x1,5, tuyau 5/8", 24/60°, léger	16	-	En stock	Demande
TI-ZMW211-30-12	Raccord coudé 90° femelle M30x2, flexible 3/4", 24/60°, léger	20	-	En stock	Demande
TI-ZMW211-30-16	Embout 90° femelle M30x2, tuyau 1", 24/60°, léger	25	-	En stock	Demande
TI-ZMW211-36-16	Raccord coudé 90° femelle M36x2, tuyau 1", 24/60°, léger	25	-	En stock	Demande
TI-ZMW211-45-20	Raccord d’extrémité 90° femelle M45x2, flexible 1.1/4", 24/60°, léger	32	-	En stock	Demande
TI-ZMW211-52-24	Raccord coudé 90° FF M52x2, tuyau 1.1/2", 24/60°, léger	38	-	En stock	Demande

Vous avez besoin d'une plus grande quantité de produits ou d'un devis personnalisé ?

Appelez-nous : +33 679 352 568 ou envoyez-nous un e-mail : wirthjeanpierre@aol.fr

Envoyer une demande

Embout hydraulique standard (type Z – avec « queue » hydraulique classique pour flexible), avec filetage métrique interne et écrou, étanchéité métal-métal, cône universel 24°/60° (DKL), coudé à 90°, série légère. Conçu pour le sertissage sur flexibles hydrauliques et industriels à l’aide d’une bague de sertissage adaptée au type de flexible. Matière : acier au carbone, galvanisé.