Can Metric tube end BES 90Â°, type ZMR212, heavy series, carbon steel be crimped using standard hydraulic crimping sleeves for hoses?

Yes . Metric tube end BES 90Â°, type ZMR212, heavy series, carbon steel can be crimped using standard hydraulic crimping sleeves intended for the hose type. The fitting is a standard hydraulic end (type Z) with a regular hydraulic tail for hose connection and is specifically described as "Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose." Ensure you use a crimping sleeve sized and profiled for the specific hose construction (e.g., single-wire, multi-wire, textile) and follow the hose and sleeve manufacturerâs crimping specifications (die set, pressure, indent dimensions). Verify material compatibility (galvanized carbon steel fitting vs. hose reinforcement) and perform pressure/leak tests after crimping to confirm a reliable seal with the cutting ring (BES) and proper assembly.

Is Metric tube end BES 90Â°, type ZMR212, heavy series, carbon steel compatible with crimping using industrial hose crimping sleeves?

Yes. Metric tube end BES 90Â°, type ZMR212, heavy series, carbon steel is designed for crimping in hydraulic and industrial hoses using a crimping sleeve appropriate for the hose type. It features a regular hydraulic tail (type Z) with BES cutting-ring sealing and is specified for crimping applications; material: carbon steel, galvanized. Ensure you use the correct sleeve profile and crimping parameters for the specific hose to guarantee proper seal and safety.

Does Metric tube end BES 90Â°, type ZMR212, heavy series, carbon steel require specific crimping sleeve dimensions?

Metric tube end BES 90Â°, type ZMR212, heavy series, carbon steel requires a crimping sleeve matched to the hose type rather than a unique, fixed sleeve dimension inherent to the fitting itself. The product is designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the specific hose construction (inner tube, reinforcement layers, cover) and nominal hose size. Key points: - The fitting uses a cutting ring (BES) for sealing and a regular hydraulic tail (type Z) that fits into the hose; the sleeveâs role is to crimp the hose assembly onto that tail. - Sleeve dimensions (length, inner diameter before crimp, wall thickness, and profile) depend on the hose manufacturer and series, and must match the hoseâs outer diameter and reinforcement type. - Use the crimp sleeve recommended by the hose manufacturer or the hose/fitting supplier; they provide the correct sleeve part number and crimping dimensions (closed diameter, indent pattern) for reliable seal and mechanical strength. - Confirm material compatibility (typically carbon steel sleeves for carbon steel fittings) and ensure the crimping tool is set to the specified crimping parameters for the selected sleeve/hose combination. In short: Metric tube end BES 90Â°, type ZMR212, heavy series, carbon steel does not mandate a unique sleeve size itself. you must use the crimping sleeve specified for the hose being assembled.

Embout tube métrique BES 90°, type ZMR212, série lourde, acier au carbone

Informations complémentaires

Matériau	CS – acier (fonte)
Longueur standard [m]	20

Embout hydraulique standard (type Z – avec « queue » hydraulique classique pour flexible), avec tube métrique, étanchéité par bague coupante (BES), coudé 90°, série lourde. Conçu pour le sertissage sur flexibles hydrauliques et industriels à l’aide d’une douille de sertissage adaptée au type de flexible. Matériau : acier au carbone, galvanisé.

Liste des variantes de produit

Référence article	Nom de la variante du produit	DN	BAR	Disponibilité	Actions	Catalogue
TI-ZMR212-08-04	Raccord coudé 90° tubulaire 8 mm, tuyau 1/4", renforcé	6	-	En stock	Demande
TI-ZMR212-10-04	Raccord coudé 90° tubulaire 10 mm, tuyau 1/4", renforcé	6	-	En stock	Demande
TI-ZMR212-12-04	Raccord coudé 90° tubulaire 12 mm, tuyau 1/4", renforcé	6	-	En stock	Demande
TI-ZMR212-12-05	Raccord coudé 90° tubulaire 12 mm, tuyau 5/16", renforcé	8	-	En stock	Demande
TI-ZMR212-14-06	Raccord coudé 90° tubulaire 14 mm, tuyau 3/8", renforcé	10	-	En stock	Demande
TI-ZMR212-14-08	Raccord coudé 90° tubulaire 14 mm, tuyau 1/2", renforcé	12	-	En stock	Demande
TI-ZMR212-16-08	Raccord coudé 90° tubulaire 16 mm, tuyau 1/2", renforcé	12	-	En stock	Demande
TI-ZMR212-20-08	Raccord coudé 90° tubulaire 20 mm, tuyau 1/2", renforcé	12	-	En stock	Demande
TI-ZMR212-20-10	Embout tubulaire 90° 20 mm, tuyau 5/8", lourd	16	-	En stock	Demande
TI-ZMR212-20-12	Raccord coudé 90° tubulaire 20 mm, tuyau 3/4", renforcé	20	-	En stock	Demande
TI-ZMR212-25-12	Raccord coudé 90° tubulaire 25 mm, tuyau 3/4", renforcé	20	-	En stock	Demande
TI-ZMR212-25-16	Raccord coudé 90° tubulaire 25 mm, tuyau 1", renforcé	25	-	En stock	Demande
TI-ZMR212-30-16	Raccord coudé 90° tubulaire 30 mm, tuyau 1", renforcé	25	-	En stock	Demande
TI-ZMR212-38-20	Embout coudé à 90°, tubulaire 38 mm, tuyau 1 1/4", renforcé	32	-	En stock	Demande
TI-ZMR212-38-24	End fitting 90° tubular 38 mm, hose 1.1/2", heavy	38	-	En stock	Demande	-

Vous avez besoin d'une plus grande quantité de produits ou d'un devis personnalisé ?

Appelez-nous : +33 679 352 568 ou envoyez-nous un e-mail : wirthjeanpierre@aol.fr

Envoyer une demande

Embout hydraulique standard (type Z – avec « queue » hydraulique classique pour flexible), avec tube métrique, étanchéité par bague coupante (BES), coudé 90°, série lourde. Conçu pour le sertissage sur flexibles hydrauliques et industriels à l’aide d’une douille de sertissage adaptée au type de flexible. Matériau : acier au carbone, galvanisé.