Can the Coolant valve with NPT GZ, 3/8" system, JETON handle continuous operation at 3 bar and +65Â°C in acetal without degradation?

Yes. The Coolant valve with NPT GZ, 3/8" system, JETON handle, made of acetal, is specified for a working pressure up to 3 bar and an operating temperature up to +65Â°C. Running continuously at 3 bar and +65Â°C therefore falls within the stated limits and.assuming standard installation and typical coolant chemistry.should not cause material degradation. Caveats: long-term performance depends on fluid compatibility (some aggressive coolants or solvents can attack acetal), UV or chemical exposure, mechanical wear at seals/threads, and cycling or vibration. If the coolant contains strong acids, alkalis, or chlorinated hydrocarbons, or if sterilization/cleaning uses solvents or high-temperature spikes above +65Â°C, accelerated degradation may occur. For critical or continuous high-duty applications, verify fluid compatibility with acetal, inspect seals periodically, and consider a higher-spec material or valve rated with safety margin.

Is the Coolant valve with NPT GZ, 3/8" system, JETON compatible with common cooling fluids at 3 bar and +65Â°C in acetal?

Yes. Coolant valve with NPT GZ, 3/8" system, JETON, made of acetal, rated for up to 3 bar and up to +65Â°C, is compatible with common cooling fluids (water, water-glycol mixtures, typical soluble cutting fluids and light mineral-oil based coolants) under those conditions. Acetal (POM) offers good chemical resistance to these typical cooling media at the specified pressure and temperature. Avoid strong acids, strong bases, chlorinated hydrocarbons, ketones and certain aromatic solvents, which can degrade acetal. If your coolant contains aggressive additives or concentrations outside normal ranges, verify with the coolant supplier or perform compatibility testing.

Does the Coolant valve with NPT GZ, 3/8" system, JETON require periodic lubrication when used in acetal at up to 3 bar and +65Â°C?

No. Coolant valve with NPT GZ, 3/8" system, JETON does not require periodic lubrication under the specified conditions. The valve is specified as an NPT external threaded valve for use in cooling processes made of acetal, rated for working pressure up to 3 bar and operating temperature up to +65Â°C. Acetal (POM) is a low-friction engineering plastic with good dimensional stability and wear resistance in typical cooling-fluid environments, so routine external lubrication is not necessary for normal operation within these limits. However, ensure the valve is used with compatible fluids (non-swelling, non-aggressive to acetal) and keep connections and moving parts free of debris. If the application involves unusual contaminants, abrasive particles, aggressive chemicals, continuous high-cycling, or temperatures/pressures beyond the stated limits, inspect periodically and consider maintenance or use of a compatible lubricant approved for acetal and the process fluid.

Vanne pour liquide de refroidissement avec filetage mâle NPT, système 3/8″, JETON

Flexibles air et eau, Tous les produits/

Informations complémentaires

Matériau	P – matériau (plastique)

Vanne à filetage externe NPT pour utilisation dans les procédés de refroidissement, système 3/8″. Matière : acétal. Pression de service : jusqu’à 3 bar. Température de service : jusqu’à +65°C.

Liste des variantes de produit

Référence article	Nom de la variante du produit	DN	BAR	Disponibilité	Prix	Quantité	Actions	Catalogue
JT-83723	Vanne avec filetage mâle NPT 3/8" (système 3/8")	10	3	En stock	0 zł		Demande

Vous avez besoin d'une plus grande quantité de produits ou d'un devis personnalisé ?

Appelez-nous : +33 679 352 568 ou envoyez-nous un e-mail : wirthjeanpierre@aol.fr

Envoyer une demande

Vanne à filetage externe NPT pour utilisation dans les procédés de refroidissement, système 3/8″. Matière : acétal. Pression de service : jusqu’à 3 bar. Température de service : jusqu’à +65°C.