Is the Pneumatic shut-off valve V2V L (thread - hose) suitable for oiled and non-oiled compressed air at 10 bar and -20Â°C to +60Â°C?

Yes. The Pneumatic shut-off valve V2V L (thread - hose) is specified for a working pressure up to 10 bar and an operating temperature range of â20Â°C to +60Â°C. The manufacturer description explicitly lists the compatible medium as filtered compressed air, both oiled and nonâoiled. Given these specifications, the valve is suitable for use with oiled and nonâoiled compressed air at 10 bar within the stated temperature range, provided installation and filtration requirements are met.

Can the Pneumatic shut-off valve V2V L (thread - hose) be used with filtered compressed air at 10 bar in harsh environments?

Yes. The Pneumatic shut-off valve V2V L (thread - hose) is specified for filtered compressed air (oiled or non-oiled) at a working pressure up to 10 bar and an operating temperature range of â20Â°C to +60Â°C, so it can be used with filtered compressed air at 10 bar. For harsh environments ensure the valveâs materials and seals (O-ring and plug connection) are compatible with the specific contaminants, chemicals, temperature extremes, and mechanical stresses present; regular maintenance and appropriate external protection (e.g., corrosion-resistant coatings, shielding) are recommended to maintain reliable operation.

Does the Pneumatic shut-off valve V2V L (thread - hose) require specific O-ring material for 10 bar and -20Â°C to +60Â°C?

Pneumatic shut-off valve V2V L (thread - hose) does not inherently require a special O-ring material beyond standard recommendations for its specified operating conditions. For 10 bar pressure and operating temperatures from â20 Â°C to +60 Â°C, choose an O-ring material compatible with: - Temperature range: material must remain elastomeric at â20 Â°C and stable up to +60 Â°C. - Compressed air (filtered, oiled or nonâoiled): material must resist exposure to air and common lubricants used in pneumatic systems. - Chemical compatibility: consider any specific oils/additives used in the system. Common suitable O-ring materials: - NBR (Nitrile, BunaâN): good resistance to compressed air and mineral oils, suitable temperature range roughly â30 Â°C to +100 Â°C. a typical choice. - FKM (Viton): broader chemical resistance and higher temperature capability, compatible with many oils; more expensive but robust. - EPDM: good lowâtemperature performance (to about â40 Â°C) and resistance to weathering and some fluids, but poor compatibility with many oils/mineral oils (not recommended if oil is present). Recommendation: use NBR as the standard O-ring for Pneumatic shut-off valve V2V L (thread - hose) when the medium is compressed air with common oils. If aggressive lubricants or specific chemicals are present, or if enhanced chemical/temperature resistance is needed, select FKM or another chemically compatible elastomer. Always verify material compatibility with actual lubricants and consult supplier specifications or perform a compatibility test before final selection.

Vanne d’arrêt pneumatique V2V L (filetage – tube)

Raccords fonctionnels, Tous les produits/

Informations complémentaires

Matériau	P – matériau (plastique)

Vanne d’arrêt de type V2V L à deux positions et deux voies, en version avec un raccord fileté à joint torique d’un côté et un raccord enfichable de l’autre côté (filetage – tube). Pression de service : 10 bar. Température de service : de -20°C à +60°C. Fluide : air comprimé filtré, lubrifié ou non lubrifié.

Liste des variantes de produit

Référence article	Nom de la variante du produit	DN	BAR	Disponibilité	Actions
MW-9065408	Vanne d’arrêt V2V L, mâle BSP 1/8" - tuyau 6 mm (sortie)	-	10	En stock	Demande
MW-9065409	Vanne d’arrêt V2V L, mâle BSP 1/4" - tuyau 6 mm (sortie)	-	10	En stock	Demande
MW-9065410	Vanne d’arrêt V2V L, mâle BSP 1/8" - tuyau 8 mm (sortie)	-	10	En stock	Demande
MW-9065411	Vanne d’arrêt V2V L, mâle BSP 1/4" - tuyau 8 mm (sortie)	-	10	En stock	Demande
MW-9065412	Vanne d’arrêt V2V L, mâle BSP 3/8" - tuyau 8 mm (sortie)	-	10	En stock	Demande

Vous avez besoin d'une plus grande quantité de produits ou d'un devis personnalisé ?

Appelez-nous : +33 679 352 568 ou envoyez-nous un e-mail : wirthjeanpierre@aol.fr

Envoyer une demande

Vanne d’arrêt de type V2V L à deux positions et deux voies, en version avec un raccord fileté à joint torique d’un côté et un raccord enfichable de l’autre côté (filetage – tube). Pression de service : 10 bar. Température de service : de -20°C à +60°C. Fluide : air comprimé filtré, lubrifié ou non lubrifié.