Can the Vacuum valve (vent) with male thread, polypropylene be installed on a 2" threaded IBC cover without removing the lid for unloading?

Yes. The Vacuum valve (vent) with male thread, polypropylene is specifically designed for unloading IBC pallet containers without disassembling the cover. It fits 2" threaded openings on the upper inlet covers, is made of polypropylene with a stainless steel spring and LDPE seal, and opens at 0.069 bar (1 psi), enabling safe venting during unloading while remaining installed.

Does the Vacuum valve (vent) with male thread, polypropylene require periodic maintenance or seal replacement?

Vacuum valve (vent) with male thread, polypropylene generally requires minimal maintenance. Periodic inspection is recommended to ensure the polypropylene body and stainless-steel spring are free of damage, corrosion or debris that could affect operation. The LDPE seal can wear, harden or become deformed over time or with chemical exposure; inspect it regularly (e.g., during routine IBC checks) and replace if signs of cracking, compression set, leaks or impaired opening/closing appear. Clean components with compatible, nonâaggressive agents; avoid solvents that degrade LDPE or polypropylene. Typical preventive maintenance: visual check and functional test at regular intervals based on service conditions; seal replacement as needed rather than on a fixed schedule.

Is the Vacuum valve (vent) with male thread, polypropylene compatible with different IBC cover materials?

Vacuum valve (vent) with male thread, polypropylene Format is generally compatible with many IBC cover materials, but compatibility depends on the specific cover material and operating conditions. - Polypropylene body: chemically compatible with most plastics (PE, HDPE, PVC) and many coated metals; good for common IBC covers made of polyethylene or polypropylene. - Thread type: designed for a 2" threaded openingâmechanical compatibility requires the cover to have a matching 2" female thread; different thread standards or damaged/warped covers can prevent proper fit. - Seal material (LDPE): provides a good seal with plastic covers; with metal covers, ensure the sealing surface is smooth and free of corrosion for leak-free mating. LDPE may have limited chemical/temperature resistance compared with elastomers. - Spring stainless steel: corrosion-resistant, suitable for most environments; aggressive chemicals or highly acidic/basic media could still affect longevity if exposed. - Application limits: opening pressure 0.069 bar (1 psi). ensure cover and connected system tolerate this vent setpoint. High temperatures, solvents incompatible with polypropylene/LDPE, or pressurized/hazardous media may require alternative materials. Recommendation: verify the cover has a 2" female thread and confirm chemical and temperature compatibility of polypropylene/LDPE with the IBC contents. For metal covers, inspect sealing surface condition; for aggressive chemicals or extreme temperatures, consult manufacturer or choose vent materials rated for those conditions.

Clapet de dépression (évent) avec filetage mâle, polypropylène

Informations complémentaires

Matériau	P – matériau (plastique)

Clapet conçu pour la vidange des conteneurs-palettes IBC, permettant leur vidange sans qu’il soit nécessaire de démonter le couvercle. À monter sur les couvercles supérieurs de l’orifice de remplissage avec ouverture filetée 2″. Matériau : polypropylène. Ressort : acier inoxydable. Étanchéité : polyéthylène (LDPE). Pression d’ouverture : 0,069 bar (1 psi).

Liste des variantes de produit

Référence article	Nom de la variante du produit	DN	BAR	Disponibilité	Prix	Quantité	Actions	Catalogue
AC-IBV-PV-M200	Vanne de dépression (aérateur) avec filetage mâle 2" BSP	-	-	En stock	0 zł		Demande
AC-IBV-PV-M200-NPS	Soupape de dépression (aérateur) avec filetage mâle 2" NPS	-	-	En stock	0 zł		Demande

Vous avez besoin d'une plus grande quantité de produits ou d'un devis personnalisé ?

Appelez-nous : +33 679 352 568 ou envoyez-nous un e-mail : wirthjeanpierre@aol.fr

Envoyer une demande

Clapet conçu pour la vidange des conteneurs-palettes IBC, permettant leur vidange sans qu’il soit nécessaire de démonter le couvercle. À monter sur les couvercles supérieurs de l’orifice de remplissage avec ouverture filetée 2″. Matériau : polypropylène. Ressort : acier inoxydable. Étanchéité : polyéthylène (LDPE). Pression d’ouverture : 0,069 bar (1 psi).