Is the Y coolant manifold, 3/4" system, JETON made of acetal suitable for continuous use at temperatures up to +65Â°C and pressures up to 1.4 bar?

Yes. The Y coolant manifold, 3/4" system, JETON made of acetal is specified for continuous operation up to +65Â°C and a working pressure up to 1.4 bar. Given those specifications (Material: acetal; Working pressure: up to 1.4 bar; Operating temperature: up to +65Â°C), it is suitable for continuous use within those temperature and pressure limits. Ensure the application does not exceed the stated maximums and consider system-wide factors (chemical compatibility, cyclical loading, UV exposure) that could affect long-term performance.

Can the T-piece "Y" coolant manifold, 3/4" system, JETON withstand brief pressure spikes above 1.4 bar or temperatures above +65Â°C?

The T-piece "Y" coolant manifold, 3/4" system, JETON is specified for a working pressure up to 1.4 bar and an operating temperature up to +65Â°C. Brief, occasional spikes slightly above these limits may be tolerated in practice, but they are outside the stated specifications and could reduce service life or cause failure. For safe, reliable operation and to maintain warranty/ liability coverage, do not exceed 1.4 bar or +65Â°C; if your application may see excursions above those values, use a component rated for higher pressure/temperature or consult the manufacturer for guidance.

Does the T-piece "Y" coolant manifold, 3/4" system, JETON resist chemical exposure from common coolants at 65Â°C?

Generally yes, but with caution. The T-piece "Y" coolant manifold, 3/4" system, JETON Format is made of acetal (POM) and specified for operation up to +65Â°C and working pressures up to 1.4 bar. Acetal has good mechanical strength, low water absorption, and good resistance to many common coolants (aqueous glycols such as ethylene glycol and propylene glycol, and water-based mixtures with typical corrosion inhibitors) at ambient and moderately elevated temperatures. so in typical coolant formulations at 65Â°C it is likely to perform acceptably for normal service life. Caveats and limits: - Acetal can be attacked by strong acids, strong bases, and certain chlorinated or aromatic hydrocarbons. If the coolant contains aggressive additives, high concentrations of solvents, or contamination with fuels/oils/solvents, chemical compatibility may be compromised. - Long-term exposure at the maximum operating temperature can accelerate degradation vs. room temperature; consider potential stress cracking under pressure and thermal cycling. - The specified temperature limit is +65Â°C. do not exceed this. Also ensure the system pressure and any transient spikes remain â¤1.4 bar. - For critical applications, confirm the exact coolant formulation (including inhibitors, biocides, pH, and solvent content) and request manufacturer chemical-compatibility data or run an immersion/aging test on acetal with that specific fluid at 65Â°C. Conclusion: For common water-glycol engine/industrial coolants and standard inhibitor packages at up to 65Â°C, the T-piece "Y" coolant manifold, 3/4" system, JETON Format (acetal) is generally resistant; for strong acids/bases, solvents, or unknown/atypical formulations, verify compatibility before use.

Collecteur en T « Y » pour liquide de refroidissement, système 3/4″, JETON

Flexibles air et eau, Tous les produits/

Informations complémentaires

Matériau	P – matériau (plastique)
Longueur standard [m]	0.3

Séparateur en Y pour liquide de refroidissement – système 3/4″. Matière : acétal. Pression de service : jusqu’à 1,4 bar. Température de service : jusqu’à +65°C.

Liste des variantes de produit

Référence article	Nom de la variante du produit	DN	BAR	Disponibilité	Prix	Quantité	Actions	Catalogue
JT-86068	Té (système 3/4")	-	1.4	En stock	0 zł		Demande

Vous avez besoin d'une plus grande quantité de produits ou d'un devis personnalisé ?

Appelez-nous : +33 679 352 568 ou envoyez-nous un e-mail : wirthjeanpierre@aol.fr

Envoyer une demande

Séparateur en Y pour liquide de refroidissement – système 3/4″. Matière : acétal. Pression de service : jusqu’à 1,4 bar. Température de service : jusqu’à +65°C.