Can the Extender for coolant, 1/2" system, JETON withstand continuous operation up to +65Â°C without deformation?

Yes. According to the product description, the Extender for coolant, 1/2" system, JETON Format is made of acetal and has an operating temperature rated up to +65Â°C. Acetal (POM) is dimensionally stable and resistant to creep within its specified temperature range, so continuous operation at or below +65Â°C should not cause deformation if used under normal coolant system conditions and within the stated rating. Ensure system pressures and chemical compatibility are also within manufacturer limits for long-term reliability.

Is the Extender for coolant, 1/2" system, JETON compatible with standard acetal fittings at temperatures up to +65Â°C?

Yes. Extender for coolant, 1/2" system, JETON Format is made of acetal and rated for operating temperatures up to +65Â°C, so it is compatible with standard acetal fittings at those temperatures.

Does the Extender for coolant, 1/2" system, JETON require periodic inspection when used at temperatures near +65Â°C?

Yes. When the Extender for coolant, 1/2" system, JETON Format is used at temperatures near its maximum operating temperature of +65Â°C, periodic inspection is recommended. Although made of acetal, which performs well up to +65Â°C, prolonged exposure at or near the upper limit can accelerate material aging, dimensional creep, loss of mechanical strength, or stress crackingâespecially in coolant environments or under mechanical load. Inspect for signs of deformation, cracks, discoloration, leaks at joints (noting there is no clamp), and secure fit to adjacent segments. Establish inspection intervals based on operating hours, thermal cycling frequency, chemical compatibility of the coolant, and criticality of the application; for many installations a routine visual check during regular maintenance and more thorough inspections at defined service intervals is prudent. Replace the extender immediately if any deterioration or leakage is observed.

Rallonge pour liquide de refroidissement, système 1/2″, JETON

Flexibles air et eau, Tous les produits/

Informations complémentaires

Élément d’extension pour utilisation dans les systèmes d’alimentation en liquide de refroidissement afin de réduire le nombre de segments – système 1/2″. Sans collier. Matière : acétal. Température de service : jusqu’à +65°C.

Liste des variantes de produit

Référence article	Nom de la variante du produit	DN	BAR	Disponibilité	Prix	Quantité	Actions	Catalogue
JT-84441	Rallonge L = 96,30 mm (système 1/2")	-	2	En stock	0 zł		Demande

Vous avez besoin d'une plus grande quantité de produits ou d'un devis personnalisé ?

Appelez-nous : +33 679 352 568 ou envoyez-nous un e-mail : wirthjeanpierre@aol.fr

Envoyer une demande

Élément d’extension pour utilisation dans les systèmes d’alimentation en liquide de refroidissement afin de réduire le nombre de segments – système 1/2″. Sans collier. Matière : acétal. Température de service : jusqu’à +65°C.