What is the maximum working pressure of the Pipe connection DIN 2353 with nozzle for measuring hose, straight when used with DN2 or DN4 measuring hoses?

The maximum working pressure of the Pipe connection DIN 2353 with nozzle for measuring hose, straight depends on two factors stated in the description: the working pressure rating of the DIN 2353 tube connection actually mounted (L . light series or S . heavy series) and the rated working pressure of the attached measuring hose (DN2 or DN4). The fitting itself is steel with zincânickel coating and is supplied with the clamping sleeve, but no single universal pressure limit is given independent of the chosen series and hose. Practical guidance: - If you mount the connection in the S (heavy) series and use a measuring hose whose rated working pressure equals or exceeds the Sâseries connection rating, the assembly can be operated up to that Sâseries rated pressure. - If you mount the L (light) series or use a hose with a lower rated pressure, the maximum working pressure is limited to the lower of the two ratings (connection series rating vs. hose rating). To determine the exact numeric maximum working pressure for a specific assembly, consult the manufacturerâs pressure ratings for: 1) the chosen DIN 2353 series (L or S) tube connection, and 2) the selected DN2 or DN4 measuring hose. The lower of those two rated pressures is the maximum working pressure for the Pipe connection DIN 2353 with nozzle for measuring hose, straight assembly.

Can the Pipe connection DIN 2353 with nozzle for measuring hose, straight be used with other hose diameters besides DN2 and DN4?

Pipe connection DIN 2353 with nozzle for measuring hose, straight Format: Based on the description, the nozzle end is specifically intended for measuring hoses DN2 or DN4 and is supplied complete with a matching clamping sleeve. Therefore it is not designed for other hose diameters without changing the end fitting and sleeve to match the alternative diameter. Additionally, safe use depends on the working pressure rating of both the mounted tube connection (L or S series) and the hose chosen. To use other hose sizes you must replace the nozzle/end piece and appropriate clamping sleeve rated for that hose and verify pressure compatibility; otherwise do not use different diameters.

Does the Pipe connection DIN 2353 with nozzle for measuring hose, straight require a specific clamping sleeve type for DN2 vs DN4?

Yes. The Pipe connection DIN 2353 with nozzle for measuring hose, straight is supplied complete with a clamping sleeve sized for the hose end specified (DN2 or DN4). That means a specific clamping sleeve type appropriate to DN2 or DN4 is required and is included with the connectionâuse the sleeve that matches the hose nominal diameter (DN2 for DN2 hoses, DN4 for DN4 hoses) to ensure correct assembly, sealing and working pressure performance.

Raccord pour tube DIN 2353 avec embout pour tuyau de mesure, droit

Informations complémentaires

Matériau	CS – acier (fonte)

Raccord pour tube droit, à raccorder au moyen d’une bague et d’un écrou DIN 2353, avec embout destiné au tuyau de mesure. Le raccord existe en version L (série légère) et S (série lourde) ; l’embout est destiné aux tuyaux DN2 ou DN4 et fourni complet avec douille de serrage. La pression de service dépend du raccord monté sur le tube et de la pression de service du tuyau. Matériau : acier avec revêtement zinc-nickel.

Liste des variantes de produit

Référence article	Nom de la variante du produit	DN	BAR	Disponibilité	Actions
PS-801-30-004-00	Embout tubulaire 4 mm, tuyau 2x5 mm, avec douille	2	-	En stock	Demande
PS-801-30-006-00	Embout tubulaire 6 mm, tuyau 2x5 mm, avec douille	2	-	En stock	Demande
PS-801-30-008-00	Embout tubulaire 8 mm, tuyau 2x5 mm, avec douille	2	-	En stock	Demande
PS-804-30-004-00	Embout tubulaire 4 mm, tuyau 4x8 mm, avec douille	4	-	En stock	Demande
PS-804-30-006-00	Embout tubulaire 6 mm, tuyau 4x8 mm, avec douille	4	-	En stock	Demande
PS-804-30-008-00	Embout tubulaire 8 mm, tuyau 4x8 mm, avec douille	4	-	En stock	Demande

Vous avez besoin d'une plus grande quantité de produits ou d'un devis personnalisé ?

Appelez-nous : +33 679 352 568 ou envoyez-nous un e-mail : wirthjeanpierre@aol.fr

Envoyer une demande

Raccord pour tube droit, à raccorder au moyen d’une bague et d’un écrou DIN 2353, avec embout destiné au tuyau de mesure. Le raccord existe en version L (série légère) et S (série lourde) ; l’embout est destiné aux tuyaux DN2 ou DN4 et fourni complet avec douille de serrage. La pression de service dépend du raccord monté sur le tube et de la pression de service du tuyau. Matériau : acier avec revêtement zinc-nickel.