Is the IBC connector for pallet containers with GZ/GW, polypropylene compatible with all standard IBC container threads per DIN EN 12713 and suitable for use up to 7 bar?

Yes. The IBC connector for pallet containers with GZ/GW, polypropylene is fully compatible with standard IBC container threads per DIN EN 12713: it features an external trapezoidal thread compliant with that standard and an internal thread, and these trapezoidal threads are 100% compatible with IBC container threads from various manufacturers. It is also suitable for use up to 7 bar (working pressure specified up to 7 bar). Material: polypropylene; seal: LDPE; operating temperature range: -10Â°C to +70Â°C (temporarily up to +80Â°C).

Can the IBC connector for pallet containers with GZ/GW, polypropylene withstand temperatures up to +80Â°C temporarily without seal failure?

Yes. The IBC connector for pallet containers with GZ/GW, polypropylene is specified for an operating temperature range of -10Â°C to +70Â°C and can tolerate temperatures temporarily up to +80Â°C without seal failure. The connector body is polypropylene and the seal is low-density polyethylene (LDPE); the manufacturer explicitly allows short-term exposure to +80Â°C. Ensure exposure is genuinely temporary and avoid sustained high-temperature or high-pressure combinations (working pressure up to 7 bar) to prevent accelerated seal aging or deformation.

Can the IBC connector for pallet containers with GZ/GW, polypropylene be used with LDPE seals for corrosive chemicals?

IBC connector for pallet containers with GZ/GW, polypropylene equipped with LDPE seals can be used with corrosive chemicals. answer: it depends; generally not recommended without chemical compatibility verification. Why: - Material of connector: polypropylene (PP) has good chemical resistance to many acids, alkalis and solvents, but not to all corrosive substances (e.g., strong oxidizers, some aromatics, chlorinated hydrocarbons, concentrated nitric acid at elevated temperature). - Seal material: LDPE offers decent resistance for many chemicals but is softer and less chemically resistant than highâperformance elastomers or fluoropolymers; LDPE can swell, soften or degrade with aggressive solvents, strong oxidizers, concentrated acids or certain organic solvents. - Operating limits: connector rated for working pressure up to 7 bar and temperature â10Â°C to +70Â°C (temporarily to +80Â°C). Elevated temperature and pressure accelerate chemical attack and permeation. Recommendation: - Check the exact chemical (concentration, temperature, presence of mixtures or oxidizers). Consult chemical compatibility charts for PP and LDPE or contact the chemical supplier. - For aggressive or unknown corrosives, use connectors/seals made from materials with proven compatibility (e.g., HDPE, PTFE, FEP, EPDM, VitonÂ®/FKM) or specified by manufacturer for that chemical. - If approved for use, validate with a compatibility certificate from the connector manufacturer and perform periodic inspection for swelling, cracking, leaks or stress corrosion. Conclusion: Do not assume safe use of IBC connector for pallet containers with GZ/GW, polypropylene with LDPE seals for corrosive chemicals without explicit compatibility verification for the specific chemical, concentration and service conditions.

Raccord IBC pour conteneurs IBC à filetage mâle/femelle, polypropylène

Informations complémentaires

Matériau	P – matériau (plastique)

Raccord IBC à filetage mâle trapézoïdal conforme à la norme DIN EN 12713 et à filetage femelle. Les filetages trapézoïdaux dont sont équipés en standard les raccords IBC sont compatibles à 100 % avec les filetages des conteneurs IBC de différents fabricants. Matériau : polypropylène. Joint : polyéthylène basse densité (LDPE). Pression de service : jusqu’à 7 bar. Température de service : de -10°C à +70°C (brièvement jusqu’à +80°C).

Liste des variantes de produit

Référence article	Nom de la variante du produit	DN	BAR	Disponibilité	Actions
AC-IBM056-F200	Raccord IBC avec filetage mâle S56x4 / filetage femelle 2" BSP	-	7	En stock	Demande
AC-IBM060-F200	Raccord IBC avec filetage mâle S60x6 / filetage femelle 2" BSP	-	7	En stock	Demande
AC-IBM060-F200-NPS	Raccord IBC avec filetage mâle S60x6 / filetage femelle 2" NPS	-	7	En stock	Demande
AC-IBM060-F200X	Raccord IBC avec filetage mâle S60x6 / filetage femelle 2" BSP	-	7	En stock	Demande
AC-IBM060-F80-MX	Raccord IBC avec filetage mâle S60x6 / filetage femelle M80x3	-	7	En stock	Demande

Vous avez besoin d'une plus grande quantité de produits ou d'un devis personnalisé ?

Appelez-nous : +33 679 352 568 ou envoyez-nous un e-mail : wirthjeanpierre@aol.fr

Envoyer une demande

Raccord IBC à filetage mâle trapézoïdal conforme à la norme DIN EN 12713 et à filetage femelle. Les filetages trapézoïdaux dont sont équipés en standard les raccords IBC sont compatibles à 100 % avec les filetages des conteneurs IBC de différents fabricants. Matériau : polypropylène. Joint : polyéthylène basse densité (LDPE). Pression de service : jusqu’à 7 bar. Température de service : de -10°C à +70°C (brièvement jusqu’à +80°C).