Is the Two-slot connector for coolant, 1/4" system, JETON suitable for continuous use at pressures up to 3 bar and temperatures up to +65Â°C?

Yes. The Two-slot connector for coolant, 1/4" system, JETON Format is specified for a working pressure up to 3 bar and an operating temperature up to +65Â°C, and its material (acetal) is commonly used for continuous service within these limits. Therefore it is suitable for continuous use at pressures up to 3 bar and temperatures up to +65Â°C, provided the application does not introduce chemical exposure, mechanical stress, or cycling beyond the stated ratings that could degrade acetal.

Can the Two-slot connector for coolant, 1/4" system, JETON be used with fluids compatible with acetal at temperatures up to +65Â°C?

Yes. The Two-slot connector for coolant, 1/4" system, JETON can be used with fluids that are compatible with acetal at temperatures up to +65Â°C. Its material is acetal and the specified operating temperature is up to +65Â°C; the working pressure rating is up to 3 bar, so ensure your fluid and system conditions (temperature and pressure) do not exceed these limits and that the fluid is confirmed compatible with acetal.

Does the Two-slot connector for coolant, 1/4" system, JETON require any special maintenance when used at up to 3 bar and +65Â°C?

No special maintenance is required for the Two-slot connector for coolant, 1/4" system, JETON when used at up to 3 bar and +65Â°C, provided it is used as intended and within its specified limits. Recommended routine practices: - Inspect visually before use and periodically for signs of wear, cracks, deformation or chemical attack on the acetal body. - Ensure connections and seals are clean and free of debris to maintain proper sealing. - Check fittings and hose clamps for tightness to prevent leaks. - If exposed to aggressive chemicals or fluids not compatible with acetal, replace the connector or consult material compatibility information. - Replace the connector if any leak, permanent deformation or significant wear is observed. Following these simple checks will ensure reliable service under the stated pressure and temperature conditions.

Connecteur double pour liquide de refroidissement, système 1/4″, JETON

Flexibles air et eau, Tous les produits/

Informations complémentaires

Matériau	P – matériau (plastique)

Connecteur double pour liquide de refroidissement – système 1/4″. Matériau : acétal. Pression de service : jusqu’à 3 bar. Température de service : jusqu’à +65°C.

Liste des variantes de produit

Référence article	Nom de la variante du produit	DN	BAR	Disponibilité	Prix	Quantité	Actions	Catalogue
JT-82011	Raccord à double emboîtement (système 1/4")	-	3	En stock	0 zł		Demande

Vous avez besoin d'une plus grande quantité de produits ou d'un devis personnalisé ?

Appelez-nous : +33 679 352 568 ou envoyez-nous un e-mail : wirthjeanpierre@aol.fr

Envoyer une demande

Connecteur double pour liquide de refroidissement – système 1/4″. Matériau : acétal. Pression de service : jusqu’à 3 bar. Température de service : jusqu’à +65°C.