Is the Two-slot connector for coolant, 1/2" system, JETON made of acetal safe for continuous use at up to 2 bar and +65Â°C?

Yes. The Two-slot connector for coolant, 1/2" system, JETON Format made of acetal is specified for working pressure up to 2 bar and an operating temperature up to +65Â°C, so it is safe for continuous use within those limits. Ensure actual installation and operating conditions (pressure spikes, chemical compatibility of the coolant, mounting stresses, and exposure to UV or aggressive agents) do not exceed the specified ratings; otherwise safety and service life may be compromised. If operating conditions approach the limits, consider periodic inspection or a safety margin.

Can the Two-slot connector for coolant, 1/2" system, JETON handle occasional exposure to temperatures above +65Â°C without damage?

Two-slot connector for coolant, 1/2" system, JETON - based on the provided specification (material: acetal; operating temperature up to +65Â°C), occasional exposure above +65Â°C is not recommended. Acetal (POM) has good thermal stability but the stated maximum operating temperature is +65Â°C; exceeding this limit can accelerate material softening, dimensional change, loss of mechanical strength and sealing performance, and may shorten service life. If occasional short spikes only marginally exceed +65Â°C and pressures remain low, immediate catastrophic failure is unlikely, but reliability and long-term performance cannot be guaranteed. For safe use above +65Â°C consider a connector specified for higher temperatures or consult the manufacturer for confirmed intermittent temperature limits.

Does the Two-slot connector for coolant, 1/2" system, JETON resist common coolant chemicals at up to +65Â°C and 2 bar?

Yes. The Two-slot connector for coolant, 1/2" system, JETON (material: acetal) is rated for operation up to +65Â°C and a working pressure up to 2 bar. Acetal (POM) has good chemical resistance to many common coolant formulations used in metalworking and industrial applications, and its specified temperature and pressure limits match the conditions you asked about (+65Â°C and 2 bar). Therefore, under those conditions it will resist common coolant chemicals. Note: specific coolant formulations can vary; for aggressive or specialty chemistries, verify compatibility with the coolant manufacturer or perform a compatibility test.

Connecteur à deux fentes pour liquide de refroidissement, système 1/2″, JETON

Flexibles air et eau, Tous les produits/

Informations complémentaires

Matériau	P – matériau (plastique)

Connecteur à deux sorties pour liquide de refroidissement – système 1/2″. Matière : acétal. Pression de service : jusqu’à 2 bar. Température de service : jusqu’à +65°C.

Liste des variantes de produit

Référence article	Nom de la variante du produit	DN	BAR	Disponibilité	Prix	Quantité	Actions	Catalogue
JT-84011	raccord double femelle (système 1/2")	-	2	En stock	0 zł		Demande

Vous avez besoin d'une plus grande quantité de produits ou d'un devis personnalisé ?

Appelez-nous : +33 679 352 568 ou envoyez-nous un e-mail : wirthjeanpierre@aol.fr

Envoyer une demande

Connecteur à deux sorties pour liquide de refroidissement – système 1/2″. Matière : acétal. Pression de service : jusqu’à 2 bar. Température de service : jusqu’à +65°C.