Is the Angle fitting W, carbon steel compatible with standard 24Â° DIN 2353 female connectors across LL, L, and S series?

Yes. The Angle fitting W, carbon steel Format (24Â° DIN 2353 socket with external metric thread on both sides) is compatible with standard 24Â° DIN 2353 female connectors across the LL, L and S series. All three series (LL . very light, L . light, S . heavy) use the same 24Â° sealing cone and standard DIN 2353 dimensions, so the W type sockets will mate correctly provided the thread sizes and series ratings match. Ensure you match the exact metric thread size (and pressure/strength requirements appropriate to LL, L or S) and use properly prepared tube ends and fittings per DIN 2353 assembly instructions for reliable sealing and mechanical performance.

Can Angle fitting W, carbon steel be used in high-pressure applications across LL, L, and S series?

Yes - Angle fitting W, carbon steel (24Â° DIN 2353 socket with external metric thread on both sides) is available in LL, L and S series, but suitability for highâpressure applications depends on the series: LL (very light) is intended for lowâpressure/lowâstress use and is generally not recommended for high pressures; L (light) can handle moderate pressures depending on size and application; S (heavy) is designed for highâpressure service and is the appropriate choice where elevated working pressures are required. Always verify the specific pressure ratings for the chosen series and fitting size per manufacturer data and DIN 2353, and consider temperature, corrosion, dynamic loads and appropriate assembly/torque.

Are installation torque values for Angle fitting W, carbon steel different between LL, L, and S series?

Yes. installation torque values for Angle fitting W, carbon steel differ between LL, L, and S series. Explanation: The LL (very light), L (light) and S (heavy) series represent different wall thicknesses and mechanical strength of the same 24Â° DIN 2353 socket with external metric thread on both sides (Angle fitting W, carbon steel). Because torque required for proper assembly depends on thread size, sealing method, material strength and required preload, fittings with thicker walls and higher material robustness (S series) will generally tolerate and often require higher tightening torque than lighter variants (L and LL). Conversely, LL series components need lower torque limits to avoid yielding or thread damage. Practical note: Use the manufacturerâs specific torque tables or DIN 2353 installation instructions for exact values per thread size and series. If such tables are unavailable, apply a conservative approach: start at the torque recommended for the lightest series and increase only to the manufacturerâs advised value for L or S, monitoring for proper seal and without exceeding material/thread strength limits.

Raccord coudé W, acier au carbone

Informations complémentaires

Matériau	CS – acier (fonte)

Raccord DIN 2353 coudé, type W : douille 24° DIN 2353 avec filetage mâle métrique des deux côtés. Disponible en : LL (série très légère), L (série légère), S (série lourde). Matière : acier au carbone, galvanisé.

Liste des variantes de produit

Référence article	Nom de la variante du produit	DN	BAR	Disponibilité	Actions
HD-W-04LL	Raccord DIN 2353 W 4LL	-	100	En stock	Demande
HD-W-06L	Raccord DIN 2353 W 6L	-	315	En stock	Demande
HD-W-06LL	Raccord DIN 2353 W 6LL	-	100	En stock	Demande
HD-W-06S	Raccord DIN 2353 W 6S	-	630	En stock	Demande
HD-W-08L	Raccord DIN 2353 W 8L	-	315	En stock	Demande
HD-W-08LL	Raccord DIN 2353 W 8LL	-	100	En stock	Demande
HD-W-08S	Raccord DIN 2353 W 8S	-	630	En stock	Demande
HD-W-10L	Raccord DIN 2353 W 10L	-	315	En stock	Demande
HD-W-10S	Raccord DIN 2353 W 10S	-	630	En stock	Demande
HD-W-12L	Raccord DIN 2353 W 12L	-	315	En stock	Demande
HD-W-12S	Raccord DIN 2353 W 12S	-	630	En stock	Demande
HD-W-14S	Raccord DIN 2353 W 14S	-	630	En stock	Demande
HD-W-15L	Raccord DIN 2353 W 15L	-	315	En stock	Demande
HD-W-16S	Raccord DIN 2353 W 16S	-	400	En stock	Demande
HD-W-18L	Raccord DIN 2353 W 18L	-	315	En stock	Demande
HD-W-20S	Raccord DIN 2353 W 20S	-	400	En stock	Demande
HD-W-22L	Raccord DIN 2353 W 22L	-	160	En stock	Demande
HD-W-25S	Raccord DIN 2353 W 25S	-	400	En stock	Demande
HD-W-28L	Raccord DIN 2353 W 28L	-	160	En stock	Demande
HD-W-30S	Raccord DIN 2353 W 30S	-	400	En stock	Demande
HD-W-35L	Raccord DIN 2353 W 35L	-	160	En stock	Demande
HD-W-38S	Raccord DIN 2353 W 38S	-	315	En stock	Demande
HD-W-42L	Raccord DIN 2353 W 42L	-	160	En stock	Demande

Vous avez besoin d'une plus grande quantité de produits ou d'un devis personnalisé ?

Appelez-nous : +33 679 352 568 ou envoyez-nous un e-mail : wirthjeanpierre@aol.fr

Envoyer une demande

Raccord DIN 2353 coudé, type W : douille 24° DIN 2353 avec filetage mâle métrique des deux côtés. Disponible en : LL (série très légère), L (série légère), S (série lourde). Matière : acier au carbone, galvanisé.