Is WEICON Screw Protection AN302-60 suitable for securing M20/R3/4" screws requiring 30â35 Nm breakaway torque and service from -60Â°C to +180Â°C?

Yes. WEICON Screw Protection AN302-60 is suitable for securing M20 / R3/4" screws that require a breakaway torque of 30â35 Nm and service temperatures from â60 Â°C to +180 Â°C. The product description specifies it is a highâviscosity anaerobic adhesive for securing screws, supports thread diameters up to M20 / R3/4", provides the listed operating temperature range, and gives the required breakaway torque. Allow 2â5 minutes for initial strength and 2â4 hours for full strength depending on substrate.

Can WEICON Screw Protection AN302-60 achieve initial strength in 2â5 minutes on metal for M20/R3/4" screws?

Yes. WEICON Screw Protection AN302-60 can achieve initial strength on metal in 2â5 minutes. The product description specifies a 2â5 minute initial strength window (dependent on material), with full strength reached after 2â4 hours. For screws up to M20 / R3/4" it provides a breakaway torque of 30â35 Nm and is formulated as a high-viscosity anaerobic adhesive for very strong, difficult-to-disassemble locking. Operating range is â60Â°C to +180Â°C.

Can WEICON Screw Protection AN302-60 be used in pen-type dispensing for M20/R3/4" screws needing 30â35 Nm?

Yes. WEICON Screw Protection AN302-60 in the pen-type container can be used for pen-type dispensing onto M20 / R3/4" screws that require a breakaway torque of 30â35 Nm, given the product specifications you provided: - Viscosity/type: High-viscosity anaerobic adhesive formulated for securing screws, very strong and hard to disassemble. suitable for threaded fasteners needing permanent or semi-permanent locking. - Maximum thread diameter: Up to M20 / R3/4". matches your screw size. - Breakaway torque: 30â35 Nm. adhesiveâs performance aligns with your torque requirement. - Temperature range: -60Â°C to +180Â°C. covers typical service conditions for many applications. - Cure times: Initial strength in 2â5 minutes and full strength in 2â4 hours (material-dependent). feasible for practical assembly workflows. - Packaging: Pen-type container. intended for precise, manual dispensing on individual screws or threads. Practical notes to ensure success: - Clean and degrease mating threads before application for reliable curing and torque performance. - Apply appropriate amount from the pen to cover the threaded area without excess. - Allow recommended cure time for full strength before subjecting to service loads. - If disassembly or rework is anticipated, consider that the product is described as very strong and difficult to disassemble; heating or mechanical effort may be required. Conclusion: WEICON Screw Protection AN302-60 Format in the pen-type container is appropriate for pen dispensing on M20 / R3/4" screws needing 30â35 Nm, provided surface preparation and curing guidelines are followed.

WEICON Frein-filet AN302-60

Informations complémentaires

Colle anaérobie à haute viscosité pour le blocage des vis contre le dévissage, très forte, démontage difficile. Couleur : vert. Diamètre maximal du filetage : jusqu’à M20 ou R3/4″. Plage de températures de service : de -60°C à +180°C. Couple de rupture pour la vis : 30-35 Nm. Temps d’obtention de la résistance initiale : 2-5 min (selon le matériau). Temps d’obtention de la résistance complète : après 2-4 h (selon le matériau). Conditionnement de type stylo.

Liste des variantes de produit

Référence article	Nom de la variante du produit	DN	BAR	Disponibilité	Prix	Quantité	Actions	Catalogue
WE-AN30-260-P-050	Frein-filet pour vis pour matériaux passifs AN30260 (stylo 50 ml)	-	-	En stock	0 zł		Demande

Vous avez besoin d'une plus grande quantité de produits ou d'un devis personnalisé ?

Appelez-nous : +33 679 352 568 ou envoyez-nous un e-mail : wirthjeanpierre@aol.fr

Envoyer une demande

Colle anaérobie à haute viscosité pour le blocage des vis contre le dévissage, très forte, démontage difficile. Couleur : vert. Diamètre maximal du filetage : jusqu’à M20 ou R3/4″. Plage de températures de service : de -60°C à +180°C. Couple de rupture pour la vis : 30-35 Nm. Temps d’obtention de la résistance initiale : 2-5 min (selon le matériau). Temps d’obtention de la résistance complète : après 2-4 h (selon le matériau). Conditionnement de type stylo.