Can NiTO SS water quick connector plug with GZ, stainless steel be used interchangeably between 1/2â³ and 3/4â³ systems?

No . NiTO SS water quick connector plug with GZ, stainless steel cannot be used interchangeably between 1/2â³ and 3/4â³ systems. The product is available in two distinct BSP thread sizes (1/2â³ and 3/4â³) and the manufacturer explicitly forbids direct connection of components from different systems (for example, a 1/2â³ socket with a 3/4â³ plug). Using mismatched sizes risks improper sealing, leaks, mechanical damage and compromised hygiene/corrosion performance. Use the matching plug and socket sizes for safe operation within the rated conditions: AISI 316L stainless steel, 25 bar working pressure, â20Â°C to +150Â°C, Viton sealing.

Can NiTO SS water quick connector plug with GZ, stainless steel withstand repeated sterilization cycles (autoclave)?

Yes. NiTO SS water quick connector plug with GZ, stainless steel (AISI 316L) is suitable for repeated autoclave sterilization cycles. AISI 316L stainless steel resists corrosion and high temperatures; the connectorâs specified operating temperature up to +150Â°C covers typical autoclave temperatures (121â134Â°C). However, the sealing material is Viton - while Viton tolerates high temperatures and many chemicals, its longâterm resistance to repeated steam autoclaving can be limited compared with silicone or PTFE. For frequent, intensive autoclaving validate seal longevity in your specific cycle conditions or consider replacing seals periodically. Operating pressure (25 bar) does not restrict autoclaving.

Does NiTO SS water quick connector plug with GZ, stainless steel tolerate exposure to aggressive cleaning chemicals?

Yes. NiTO SS water quick connector plug with GZ, stainless steel offers good tolerance to aggressive cleaning chemicals, thanks to its construction from AISI 316L stainless steel and Viton sealing. AISI 316L provides excellent corrosion resistance in demanding, hygienic environments (food industry, hospitals) and resists many acidic and alkaline cleaning agents. Viton (FKM) seals are chemically resistant to a wide range of solvents, oils, acids and alkalies and perform well across the stated temperature range (-20Â°C to +150Â°C). However, compatibility depends on the specific chemical, concentration, temperature and exposure duration. Extremely aggressive oxidizing agents (e.g., hot concentrated bleach or certain strong acids) or prolonged exposure to certain solvents can still affect stainless steel or Viton over time. For critical applications, verify the specific chemical compatibility (concentration and temperature) with AISI 316L and Viton, or consult the manufacturer for confirmation.

Embout de raccord rapide pour eau NiTO SS à filetage mâle, acier inoxydable

Informations complémentaires

Matériau	SS – acier inoxydable

Embout de raccord rapide NiTO en acier inoxydable AISI 316L, à filetage mâle BSP. Existe en deux systèmes : 1/2″ et 3/4″. Utilisé dans des conditions d’exigences accrues en matière d’hygiène et de résistance à la corrosion (par ex. industrie alimentaire, hôpitaux). Il n’est pas possible de raccorder directement des éléments de systèmes différents, par ex. une douille 1/2″ avec un embout 3/4″. Matière : acier AISI 316L. Pression de service : 25 bar. Température de service : de -20°C à +150°C. Matière du joint : Viton.

Liste des variantes de produit

Référence article	Nom de la variante du produit	DN	BAR	Disponibilité	Actions
NT-54611A3	Embout de raccord rapide 1/2", mâle 1/2" BSP, acier inoxydable	-	25	En stock	Demande
NT-54615A3	Embout mâle de raccord rapide 1/2", filetage mâle 3/4" (pour pistolet NiTO II), acier inoxydable	-	25	En stock	Demande
NT-64611A3	Embout de raccord rapide 3/4", mâle 3/4" BSP, acier inoxydable	-	25	En stock	Demande

Vous avez besoin d'une plus grande quantité de produits ou d'un devis personnalisé ?

Appelez-nous : +33 679 352 568 ou envoyez-nous un e-mail : wirthjeanpierre@aol.fr

Envoyer une demande

Embout de raccord rapide NiTO en acier inoxydable AISI 316L, à filetage mâle BSP. Existe en deux systèmes : 1/2″ et 3/4″. Utilisé dans des conditions d’exigences accrues en matière d’hygiène et de résistance à la corrosion (par ex. industrie alimentaire, hôpitaux). Il n’est pas possible de raccorder directement des éléments de systèmes différents, par ex. une douille 1/2″ avec un embout 3/4″. Matière : acier AISI 316L. Pression de service : 25 bar. Température de service : de -20°C à +150°C. Matière du joint : Viton.