Is the Foam and spray gun for lance and nozzle assembly, outlet quick-connect socket DN11.8, brass, AKBO safe to use at 24 bar and +95Â°C without additional trigger insulation?

Short answer: No . not recommended. Reasoning: The Foam and spray gun for lance and nozzle assembly, outlet quick-connect socket DN11.8, brass, AKBO specification lists a maximum working pressure of 24 bar and a maximum operating temperature of +95Â°C, so the body and internal seals are rated for those conditions. However the product description explicitly states âno insulation on the trigger.â At +95Â°C the stainless steel trigger and the operatorâs hand will be exposed to very high surface temperatures; EPDM cover and seals may protect internal parts but do not prevent the trigger from becoming dangerously hot. Without additional trigger insulation or a thermal barrier there is a substantial burn risk and reduced safe handling, particularly during extended use or repeated cycles. Also consider that exposure to nearâlimit temperature can accelerate seal wear and affect safe operation. Recommendation: Do not use without adding appropriate thermal insulation or an insulated trigger/handle accessory, wearing certified heatâresistant gloves, and confirming with the manufacturer that the trigger area is safe for direct manual operation at 95Â°C.

Can the Foam and spray gun for lance and nozzle assembly, outlet quick-connect socket DN11.8, brass, AKBO be used with different seal materials than EPDM for higher chemical compatibility?

Foam and spray gun for lance and nozzle assembly, outlet quick-connect socket DN11.8, brass, AKBO: The technical description states sealing and cover material as EPDM and gives max temperature and pressure but does not mention alternative seal options. Using different seal materials (e.g., Viton/FKM, NBR, PTFE) for higher chemical compatibility may be possible but requires confirmation from the manufacturer because changing seals can affect fit, chemical resistance, temperature limits and certification. Recommend contacting the manufacturer/supplier to ask if compatible seal kits or alternative elastomers are available and to verify compatibility with your specific chemicals, temperature and pressure conditions before modification.

Does the Foam and spray gun for lance and nozzle assembly, outlet quick-connect socket DN11.8, brass, AKBO require seasonal maintenance for EPDM seals?

Foam and spray gun for lance and nozzle assembly, outlet quick-connect socket DN11.8, brass, AKBO Format: Yes. EPDM seals benefit from seasonal inspection and basic maintenance. Although EPDM is chemically resistant and rated for temperatures up to +95Â°C, regular checks help prevent wear, hardening, swelling or damage from detergents and prolonged heat exposure. Recommended actions: - Inspect seals and blue EPDM cover visually and by touch before and after heavy seasonal use. - Clean seals with fresh water and mild, nonâpetroleum-based detergent; avoid solvents that can degrade elastomers. - Lightly lubricate with an EPDMâcompatible silicone or glycerin lubricant if seals feel dry (do not use petroleum greases). - Replace seals showing cracks, flattening, stickiness or leakage. - Store the gun in a cool, dry place away from direct sunlight and freezing conditions when not in use. Following these steps will help maintain sealing performance and prolong service life under the gunâs specified maximum working pressure (24 bar) and temperature limits.

Pistolet à mousse et pulvérisation pour montage de lances et de buses, sortie à raccord rapide DN11.8, laiton, AKBO

Informations complémentaires

Pistolet à mousse et pulvérisation pour montage de lances et de buses (sortie à raccord rapide DN11.8). Dispose d’une régulation progressive du débit et d’un verrouillage de la gâchette (sans isolation sur la gâchette). Arrêt automatique du débit lors du relâchement de la gâchette. Matériau : laiton. Gâchette en acier inoxydable. Revêtement en caoutchouc EPDM bleu. Étanchéité : EPDM. Raccordement (entrée) : filetage femelle 1/2″ BSP. Pression de service maximale : 24 bar. Température de service maximale : +95°C.

Liste des variantes de produit

Référence article	Nom de la variante du produit	DN	BAR	Disponibilité	Prix	Quantité	Actions	Catalogue
AK-KLMLCP2-BL	Pistolet pour lances et buses AKBO, (entrée) BSP mâle 1/2", (sortie) mâle DN11,8 avec gaine, sans isolation, laiton, bleu	-	24	En stock	0 zł		Demande

Vous avez besoin d'une plus grande quantité de produits ou d'un devis personnalisé ?

Appelez-nous : +33 679 352 568 ou envoyez-nous un e-mail : wirthjeanpierre@aol.fr

Envoyer une demande

Pistolet à mousse et pulvérisation pour montage de lances et de buses (sortie à raccord rapide DN11.8). Dispose d’une régulation progressive du débit et d’un verrouillage de la gâchette (sans isolation sur la gâchette). Arrêt automatique du débit lors du relâchement de la gâchette. Matériau : laiton. Gâchette en acier inoxydable. Revêtement en caoutchouc EPDM bleu. Étanchéité : EPDM. Raccordement (entrée) : filetage femelle 1/2″ BSP. Pression de service maximale : 24 bar. Température de service maximale : +95°C.