Is the AKBO HEAVY DUTY Water gun (chrome-plated brass, blue) safe for steam use and high temperatures?

No . the AKBO HEAVY DUTY Water gun (chrome-plated brass, blue) is not safe for steam use. The product description explicitly states: "Not intended for steam!" Although the body is chrome-plated brass, the seals and covers are EPDM rubber and the handle/lever are stainless steel, which limits suitability for high-temperature steam. The maximum operating temperature is +95Â°C and the working pressure is up to 24 bar; these ratings apply to hot water, not steam. Steam applications typically require components rated for higher temperatures and steam-compatible seal materials (e.g., PTFE or Viton specified for steam), so using this Water gun with steam risks seal failure, leaks, or damage. Use the Water gun only within the specified parameters (max 95Â°C, water) and the 1/2" BSP male connection and flow specifications provided.

Can the AKBO HEAVY DUTY Water gun (chrome-plated brass, blue) handle continuous use at 24 bar and near +95Â°C without performance loss?

Can the AKBO HEAVY DUTY Water gun, chrome-plated brass, AKBO HEAVY DUTY, blue handle continuous use at 24 bar and near +95Â°C without performance loss? Short answer: No - it is rated for those conditions but with caveats. Explanation: The Water gun, chrome-plated brass, AKBO HEAVY DUTY, blue specifies a working pressure of 24 bar and a maximum operating temperature of +95Â°C, so under those limits it is designed to operate. However the description explicitly states âNot intended for steam,â and EPDM seals and covers have finite lifetimes at high temperature and under continuous high-pressure use. Continuous operation at the upper limits (24 bar and ~95Â°C) will accelerate seal wear, increase risk of leak or premature failure, and may reduce flow/trigger smoothness over time. For intermittent use within specs it should perform; for sustained continuous service at those extremes, consider derating, scheduled maintenance, or a product specifically rated for continuous high-temperature/high-pressure service.

Does the Water gun, chrome-plated brass, AKBO HEAVY DUTY (blue) require special maintenance after heavy use at 24 bar?

Yes. After heavy use at 24 bar, the Water gun, chrome-plated brass, AKBO HEAVY DUTY, blue does require some maintenance to ensure longevity and safe operation: - Rinse and purge: Flush the gun with clean water to remove debris and any chemical residues that could accelerate wear of seals and EPDM components. Purge trapped water to prevent corrosion inside the body and threads. - Inspect seals and EPDM covers: Check EPDM rubber covers and internal seals for cuts, swelling, hardening or loss of elasticity. Replace any damaged seals promptly to maintain leak-free performance at high pressure. - Check stainless steel parts: Inspect handle and lever for bending, cracks or unusual wear. Clean and remove any deposits; stainless steel resists corrosion but benefits from periodic cleaning, especially after exposure to aggressive water or contaminants. - Lubrication: Lightly lubricate moving parts and the trigger mechanism with a lubricant compatible with EPDM (silicone-based or approved grease) to preserve smooth flow regulation and prevent sticking of the trigger lock. - Nozzle and flow control: Clean the adjustable outlet nozzle to prevent clogging and check the smoothness of flow regulation; remove mineral deposits if present. - Thread and connection: Inspect the 1/2" BSP male thread for damage and ensure proper sealing (use appropriate thread sealant or tape) before reconnecting. - Temperature and steam warning: Do not expose the gun to steam or temperatures above the maximum operating temperature (+95Â°C); excessive heat can damage seals and EPDM and void safe operation. - Pressure testing: After maintenance or part replacement, test the gun at working pressure in a controlled setting to verify there are no leaks and that trigger lock and flow regulation operate correctly. Regular inspections after heavy use at 24 barâparticularly of EPDM seals and moving stainless steel partsâwill help maintain performance and safety.

Pistolet à eau, laiton chromé, AKBO HEAVY DUTY, bleu

Informations complémentaires

Pistolet à eau AKBO HEAVY DUTY. Fabriqué en laiton chromé, avec capots et joints en caoutchouc EPDM, poignée et levier en acier inoxydable. Équipé d’une buse de sortie réglable, d’une régulation de débit progressive et d’un verrouillage de la gâchette. Non destiné à la vapeur ! Connexion : filetage mâle 1/2″ BSP. Pression de service : 24 bar. Température de service maximale : +95°C. Débit : 30 l/min (5 bar), 75 l/min (24 bar).

Liste des variantes de produit

Référence article	Nom de la variante du produit	DN	BAR	Disponibilité	Prix	Quantité	Actions	Catalogue
AK-CN001-BL	Pistolet à eau AKBO HEAVY DUTY, filetage femelle 1/2" BSP, laiton chromé, bleu	-	24	En stock	0 zł		Demande

Vous avez besoin d'une plus grande quantité de produits ou d'un devis personnalisé ?

Appelez-nous : +33 679 352 568 ou envoyez-nous un e-mail : wirthjeanpierre@aol.fr

Envoyer une demande

Pistolet à eau AKBO HEAVY DUTY. Fabriqué en laiton chromé, avec capots et joints en caoutchouc EPDM, poignée et levier en acier inoxydable. Équipé d’une buse de sortie réglable, d’une régulation de débit progressive et d’un verrouillage de la gâchette. Non destiné à la vapeur ! Connexion : filetage mâle 1/2″ BSP. Pression de service : 24 bar. Température de service maximale : +95°C. Débit : 30 l/min (5 bar), 75 l/min (24 bar).