Is the Air gun without nozzle, series 208 safe to use for blowing dust with compressed air at 16 bar without exceeding OSHA limits?

Air gun without nozzle, series 208 is specifically described as compliant with OSHA standard 1-13.1 and designed for blowing out contaminants with adjustable flow and high blowing force. Its rated working pressure is 16 bar and it is offered in a version without a nozzle. OSHA 1-13.1 limits for compressed air blowoff require that outlet pressure and nozzle design prevent creation of a pressure that can penetrate skin or produce dangerous noise; equipment meeting that standard is intended to be safe for blowoff tasks when used as specified. Because the product description explicitly states compliance with OSHA 1-13.1 and lists 16 bar as its working pressure, using Air gun without nozzle, series 208 at the specified 16 bar should be within OSHA limits provided you: - use the gun without adding unauthorized nozzles or modifications that increase outlet pressure or change flow characteristics; - follow manufacturer instructions and recommended accessories; - observe safe work practices (keep air directed away from personnel, wear PPE, control noise exposure). If you plan to use aftermarket nozzles, operate above rated pressure, or in a manner not described by the manufacturer, have a competent safety assessment performed to confirm compliance.

Can the Air gun without nozzle, series 208 be used safely with water or non-explosive fluids at 16 bar?

Yes. The Air gun without nozzle, series 208 is designed for air, water, and non-explosive fluids and specifies a maximum working pressure of 16 bar, so it can be used safely with water or non-explosive fluids at that pressure. Its materials (POM body, brass valve, NBR seals), burst pressure (64 bar), and operating temperature range (-20Â°C to +60Â°C) support such use. Ensure compatibility of any additional accessories and fittings, and follow applicable safety protocols and the OSHA 1-13.1 compliance guidance.

Can the Air gun without nozzle, series 208 be used with temperatures near its -20Â°C to +60Â°C operating range safely?

Yes. The Air gun without nozzle, series 208 is specified for an operating temperature range of -20Â°C to +60Â°C, so using it near those limits is within the manufacturerâs rated conditions. However, to ensure safe and reliable operation near the extremes, observe the following precautions: - Low temperatures (around -20Â°C): POM body and NBR seals can become stiffer and less flexible, which may increase trigger effort, reduce seal effectiveness, or make components more brittle. Inspect seals and valve action before use and avoid impact or shock. Allow the gun to warm gradually if it was stored in severe cold. - High temperatures (around +60Â°C): Elevated heat can soften POM and accelerate NBR aging, potentially reducing seal life or changing fit/tolerances. Avoid prolonged exposure to direct heat sources and inspect for deformation or leaks. Do not exceed the 16 bar working pressure at high temperatures without verifying system safety margins. - General: Use only air, water, or non-explosive fluids as intended. Follow maintenance schedules, check for leaks, and replace worn NBR seals or damaged parts. Ensure compatibility of any accessories with the temperature and pressure conditions. If you expect frequent or prolonged use at the temperature extremes, consider consulting the supplier or choosing materials rated for wider temperature ranges to maximize safety and longevity.

Pistolet à air sans buse, série 208

Pistolets à air, Tous les produits/

Informations complémentaires

Pistolet universel pour l’air, l’eau ainsi que les fluides non explosifs. Destiné principalement au soufflage des impuretés, y compris dans les endroits difficiles d’accès. Se caractérise par une forte puissance de soufflage, avec possibilité de régler le débit. Sa construction légère, sa forme ergonomique du pistolet et le faible effort sur la gâchette assurent un grand confort de travail. Le pistolet est équipé en standard d’une douille filetée 1/4″ BSP ou 1/4″ NPT. Ce modèle est disponible en version sans buse. Conforme au standard OSHA 1-13.1 (Agence européenne pour la sécurité et la santé au travail). Une large gamme d’accessoires complémentaires permet de l’adapter aux exigences spécifiques de l’application. Matériau : POM (corps), laiton (clapet). Étanchéité : NBR. Pression de service : 16 bar. Pression d’éclatement : 64 bar. Température de service : de -20°C à +60°C.

Liste des variantes de produit

Référence article	Nom de la variante du produit	DN	BAR	Disponibilité	Prix	Quantité	Actions	Catalogue
CJ-112080000	Pistolet à air comprimé CEJN, sans buse, filetage femelle 1/4" BSP	-	16	En stock	0 zł		Demande
CJ-112080050	Pistolet CEJN 1/4" NPT, sans buse	-	16	En stock	0 zł		Demande

Vous avez besoin d'une plus grande quantité de produits ou d'un devis personnalisé ?

Appelez-nous : +33 679 352 568 ou envoyez-nous un e-mail : wirthjeanpierre@aol.fr

Envoyer une demande

Pistolet universel pour l’air, l’eau ainsi que les fluides non explosifs. Destiné principalement au soufflage des impuretés, y compris dans les endroits difficiles d’accès. Se caractérise par une forte puissance de soufflage, avec possibilité de régler le débit. Sa construction légère, sa forme ergonomique du pistolet et le faible effort sur la gâchette assurent un grand confort de travail. Le pistolet est équipé en standard d’une douille filetée 1/4″ BSP ou 1/4″ NPT. Ce modèle est disponible en version sans buse. Conforme au standard OSHA 1-13.1 (Agence européenne pour la sécurité et la santé au travail). Une large gamme d’accessoires complémentaires permet de l’adapter aux exigences spécifiques de l’application. Matériau : POM (corps), laiton (clapet). Étanchéité : NBR. Pression de service : 16 bar. Pression d’éclatement : 64 bar. Température de service : de -20°C à +60°C.