Is the R7 ANTIABRASION synthetic braided thermoplastic hose compatible with hydraulic oil, fuels, gases, air and water-based fluids across its stated temperature range?

Yes. The R7 ANTIABRASION synthetic braided thermoplastic hose is specified for hydraulic oil, fuels, gases, air and water-based fluids and its construction (polyester inner layer, one or two synthetic braids, microâperforated polyurethane outer layer) and standards compliance (SAE 100R7, EN855âR7, ISO 3949âR7) confirm compatibility across the stated operating conditions. Note the temperature limits: -40Â°C to +100Â°C generally, but for water and air the maximum is +70Â°C; ensure the hose diameter and corresponding working pressure (70â210 bar depending on size) suit your application.

Can the R7 ANTIABRASION synthetic braided thermoplastic hose withstand continuous exposure to fuels and gases at its maximum working pressure?

Yes - the R7 ANTIABRASION synthetic braided thermoplastic hose is designed for fuels and gases and, within its specified working pressure range (70â210 bar depending on diameter), can withstand continuous exposure to those media. Its polyester inner layer and one- or two-braid synthetic reinforcement provide chemical compatibility and strength for hydraulic oil installations, gases, air, fuels and water-based fluids. Ensure operation stays within the hoseâs rated working pressure and temperature limits (â40Â°C to +100Â°C; for water and air up to +70Â°C). For specific fuel types, pressure/temperature combinations, and long-term compatibility, verify with the manufacturerâs detailed chemical compatibility and service-life data.

Does the R7 ANTIABRASION synthetic braided thermoplastic hose require specific fittings for different fluids or pressures?

Yes. the R7 ANTIABRASION synthetic braided thermoplastic hose does require appropriate fittings matched to the fluid type, pressure rating and application conditions. Key points to follow: - Pressure rating: Choose fittings rated equal to or above the hose working pressure for the specific hose diameter (70â210 bar). Underrated fittings can lead to leaks or failure. - Fluid compatibility: Use fittings made of materials compatible with the conveyed media (hydraulic oils, gases, air, fuels, water-based fluids). For example, certain fuels or aggressive fluids may require corrosionâresistant alloys or specific seals. - Temperature limits: Ensure fitting materials and seals tolerate the hoseâs operating temperature range (â40Â°C to +100Â°C; for water and air up to +70Â°C). Some seal materials degrade at higher/lower temperatures. - Construction match: Select fittings suitable for synthetic braided thermoplastic hose construction (crimp, swaged, or mechanical clamps designed for oneâ or twoâbraid reinforcement). Proper hose/fitting assembly method is critical for secure connection. - Standards and certification: Prefer fittings compliant with relevant standards and installation practices for SAE/EN/ISO systems to maintain system integrity. - Application specifics: For gaseous or highâsafety applications, use fittings rated for gas service and any required safety features (e.g., locking collars, pressure relief provisions). In short, use fittings that match the R7 ANTIABRASION hoseâs pressure rating, fluid compatibility, temperature range and braid construction to ensure safe, durable performance.

Tuyau thermoplastique à tresse synthétique R7 ANTIABRASION

Flexibles thermoplastiques, Tous les produits/

Informations complémentaires

Matériau	PEE – polyester
Température maximale de service [°C]	100
Température de service minimale [°C]	-40
Résistance au vide	vérifier

Tuyau léger et souple destiné aux installations hydrauliques à huile, aux gaz, à l’air, aux carburants et aux fluides à base d’eau. Normes : SAE 100R7, EN855-R7, ISO 3949-R7. Âme : polyester. Renforcement : une ou deux tresses synthétiques. Revêtement : polyuréthane microperforé. Pression de service : de 70 bar à 210 bar, selon le diamètre du tuyau. Température de service : de -40°C à +100°C (pour l’eau et l’air jusqu’à +70°C).

Liste des variantes de produit

Référence article	Nom de la variante du produit	DN	BAR	Disponibilité	Actions
TO-R7-04	Tuyau R7 antiabrasion 5/32"	4	210	En stock	Demande
TO-R7-05	Tuyau R7 antiabrasion 3/16"	5	210	En stock	Demande
TO-R7-06	Tuyau R7 antiabrasion 1/4"	6	210	En stock	Demande
TO-R7-08	Tuyau R7 antiabrasion 5/16"	8	190	En stock	Demande
TO-R7-10	Tuyau R7 antiabrasion 3/8"	10	160	En stock	Demande
TO-R7-13	Tuyau R7 antiabrasion 1/2"	12	140	En stock	Demande
TO-R7-16	Tuyau R7 antiabrasion 5/8"	16	105	En stock	Demande
TO-R7-19	Tuyau R7 antiabrasion 3/4"	20	90	En stock	Demande
TO-R7-25	Tuyau R7 antiabrasion 1"	25	70	En stock	Demande

Vous avez besoin d'une plus grande quantité de produits ou d'un devis personnalisé ?

Appelez-nous : +33 679 352 568 ou envoyez-nous un e-mail : wirthjeanpierre@aol.fr

Envoyer une demande

Tuyau léger et souple destiné aux installations hydrauliques à huile, aux gaz, à l’air, aux carburants et aux fluides à base d’eau. Normes : SAE 100R7, EN855-R7, ISO 3949-R7. Âme : polyester. Renforcement : une ou deux tresses synthétiques. Revêtement : polyuréthane microperforé. Pression de service : de 70 bar à 210 bar, selon le diamètre du tuyau. Température de service : de -40°C à +100°C (pour l’eau et l’air jusqu’à +70°C).