Is EWO pneumatic tool oil compatible with all pneumatic system seals and materials across -20Â°C to +80Â°C?

Short answer: No . EWO pneumatic tool oil is not guaranteed compatible with all pneumatic system seals and materials across -20Â°C to +80Â°C. Explanation: EWO pneumatic tool oil is formulated for pneumatic equipment per DIN 51 524â2, VG 32, and includes surfactants for corrosion protection over the -20Â°C to +80Â°C temperature range. Those properties address lubrication and corrosion inhibition, but compatibility with seals, hoses, plastics, elastomers and other non-metal components depends on the specific material (e.g., NBR, FKM/Viton, EPDM, PTFE, polyurethane) and formulation. Some elastomers swell, harden or degrade when exposed to certain base oils, additives or temperature extremes. Because the product description does not list tested materials or compatibility data, you should: - Check manufacturer compatibility charts or request material compatibility data from the supplier. - Perform a small-scale compatibility test (immersion, swelling, hardness, and function) on the actual seal materials at the expected temperature extremes. - Consider specifying oils with explicit seal-material approval if your system uses sensitive elastomers or polymers. In short: EWO pneumatic tool oil may be suitable for many pneumatic systems, but you must verify compatibility with your specific seal materials and operating temperatures before widespread use.

Does EWO pneumatic tool oilâs corrosion protection perform equally at -20Â°C and +80Â°C in long-term storage?

Based on the specification, EWO pneumatic tool oilâs corrosion protection is formulated to be effective across the stated temperature range (-20Â°C to +80Â°C). The surfactants in EWO pneumatic tool oil are intended to provide protection over that wide range, so in long-term storage you can expect corrosion protection to remain effective at both -20Â°C and +80Â°C, provided the product is stored in its recommended sealed packaging (1 l or 5 l) and protected from contamination and extreme thermal cycling beyond those limits.

Can EWO pneumatic tool oil be safely used in food processing pneumatic systems?

EWO pneumatic tool oil should not be used in food processing pneumatic systems unless it has explicit food-grade certification. The product description. âSpecial oil for lubrication and maintenance of pneumatic equipment according to DIN 51 524 â 2 with a viscosity class of VG 32 (according to ISO 3448). This oil contains surfactants that provide corrosion protection over a wide temperature range from -20Â°C to +80Â°C. Packaging: 1 l, 5 l.â. does not state any food-contact approvals (e.g., NSF H1, ISO 21469, FDA 21 CFR) or indicate that ingredients are safe for incidental contact with food. Surfactants and additive packages used for corrosion protection can include substances not permitted in food environments. For food processing applications you must use lubricants explicitly rated for incidental food contact and compliant with applicable standards. If you need to consider EWO pneumatic tool oil, request from the manufacturer material safety data, a declaration of conformity for food-contact use, and any relevant certifications. Without those, do not assume EWO pneumatic tool oil is safe for food-processing pneumatic systems.

Huile pour outils pneumatiques EWO

Huiles et graisses, Tous les produits/

Informations complémentaires

Huile spéciale pour la lubrification et l’entretien des équipements pneumatiques selon la norme DIN 51 524 – 2, avec une classe de viscosité VG 32 (selon ISO 3448). Cette huile contient des agents tensioactifs qui assurent une protection contre la corrosion sur une large plage de températures de -20°C à +80°C. Conditionnement : 1 l, 5 l.

Liste des variantes de produit

Référence article	Nom de la variante du produit	DN	BAR	Disponibilité	Prix	Quantité	Actions	Catalogue
EW-583	Huile pour outils pneumatiques (contenance 1 l)	-	-	En stock	0 zł		Demande
EW-5831	Huile pour outils pneumatiques (contenance 5 l)	-	-	En stock	0 zł		Demande

Vous avez besoin d'une plus grande quantité de produits ou d'un devis personnalisé ?

Appelez-nous : +33 679 352 568 ou envoyez-nous un e-mail : wirthjeanpierre@aol.fr

Envoyer une demande

Huile spéciale pour la lubrification et l’entretien des équipements pneumatiques selon la norme DIN 51 524 – 2, avec une classe de viscosité VG 32 (selon ISO 3448). Cette huile contient des agents tensioactifs qui assurent une protection contre la corrosion sur une large plage de températures de -20°C à +80°C. Conditionnement : 1 l, 5 l.