Is the MWDSE drain choke with GZ, brass suitable for continuous use at 12 bar and temperatures between -10Â°C and +80Â°C?

Yes. The MWDSE drain choke with GZ, brass (nickel-plated brass) is specified for a working pressure of 12 bar and an operating temperature range of â10 Â°C to +80 Â°C, so it is suitable for continuous use within those limits. Ensure installation and system conditions (e.g., clean compressed air, correct external thread connection, and absence of corrosive media beyond the deviceâs material compatibility) comply with manufacturer guidelines to maintain performance and longevity.

Can the MWDSE drain choke with GZ, brass withstand corrosion in humid compressed air environments?

Yes. The MWDSE drain choke with GZ, brass (nickelâplated brass) is suitable for humid compressed air environments. Nickel plating significantly improves corrosion resistance compared with bare brass, and the material is commonly used for pneumatic components exposed to moisture. Its specified operating temperature range (â10Â°C to +80Â°C) and working pressure (12 bar) are appropriate for typical compressed air systems. However, longâterm durability depends on exposure severity (continuous condensate, acidic contaminants, chlorides) and maintenance; in highly aggressive or saline environments stainless steel or additional protective coatings would be preferable.

Does the MWDSE drain choke with GZ, brass require special maintenance when used at 12 bar and +80Â°C?

No, the MWDSE drain choke with GZ, brass does not require special maintenance solely because it is used at 12 bar and +80Â°C, provided conditions stay within its specified limits. The product is rated for operating temperatures up to +80Â°C and a working pressure of 12 bar, so normal maintenance procedures for compressed-air discharge silencers apply. Recommended routine practices: - Inspect periodically for external damage, corrosion or blocked ports. - Check for build-up of condensate, oil or particulates and clean if flow is restricted (use appropriate non-corrosive cleaning method). - Verify thread tightness and sealing to prevent leaks. - Replace if nickel plating is damaged and base brass is exposed and corroding. - Follow system water/oil separation and filtration schedules to minimize contamination reaching the silencer. If operating conditions approach the upper limits continuously (sustained +80Â°C, frequent pressure spikes, corrosive media or heavy contamination), increase inspection frequency and consider protective measures or alternative materials.

Étrangleur de vidange MWDSE avec filetage extérieur, laiton

Informations complémentaires

Matériau	B – laiton (bronze)

Silencieux de décharge MWDSE avec filetage extérieur utilisé dans les systèmes d’air comprimé pour réduire l’intensité sonore. Matériau : laiton nickelé. Température de service : de -10°C à +80°C. Pression de service : 12 bar.

Liste des variantes de produit

Référence article	Nom de la variante du produit	DN	BAR	Disponibilité	Prix	Quantité	Actions	Catalogue
MW-W0970520031	Étrangleur de vidange MW DSE, laiton nickelé, filetage mâle BSP 1/8	-	-	En stock	0 zł		Demande
MW-W0970520032	Étrangleur de purge MW DSE, laiton nickelé, M BSP 1/4	-	-	En stock	0 zł		Demande

Vous avez besoin d'une plus grande quantité de produits ou d'un devis personnalisé ?

Appelez-nous : +33 679 352 568 ou envoyez-nous un e-mail : wirthjeanpierre@aol.fr

Envoyer une demande

Silencieux de décharge MWDSE avec filetage extérieur utilisé dans les systèmes d’air comprimé pour réduire l’intensité sonore. Matériau : laiton nickelé. Température de service : de -10°C à +80°C. Pression de service : 12 bar.