Is the Bulkhead connector for hose, with valve, polypropylene, PLC series DN 6.3 compatible with deionized water systems and safe at up to 8.3 bar and 0â71Â°C?

Yes. The Bulkhead connector for hose, with valve, polypropylene, PLC series DN 6.3 is described specifically for deionized water filtration and washing installations, is made of polypropylene with EPDM Oâring sealing, and its rated working pressure (up to 8.3 bar) and operating temperature range (0â+71Â°C) match your stated limits . so it is compatible with deionized water systems and safe to use up to 8.3 bar and 0â71Â°C.

Does the Bulkhead connector for hose, with valve, polypropylene, PLC series DN 6.3 require special maintenance when used with deionized water at up to 8.3 bar?

The Bulkhead connector for hose, with valve, polypropylene, PLC series DN 6.3 does not require special maintenance beyond standard good practice when used with deionized water up to 8.3 bar. Recommended actions: - Inspect EPDM Oâring periodically for swelling, cracking or hardening and replace if degraded. - Check threads, valve operation and hose connection for leaks; tighten or re-seat as needed. - Flush periodically to prevent particulate buildup; avoid aggressive cleaners that can attack polypropylene or EPDM. - Operate within specified temperature (0â71Â°C) and pressure limits (â¤8.3 bar). - Store and install to avoid prolonged UV exposure and contact with incompatible chemicals. Following these measures will ensure reliable service without special maintenance regimes.

Can the Bulkhead connector for hose, with valve, polypropylene, PLC series DN 6.3 be used for leak detection in deionized water systems?

Yes. the Bulkhead connector for hose, with valve, polypropylene, PLC series DN 6.3 is appropriate for leak detection in deionized water systems, with some practical limits. Why it fits: - Application description explicitly lists leak detection as an intended use. - Materials are compatible: polypropylene body resists deionized water chemistry; EPDM Oâring provides reliable sealing for aqueous systems. - Pressure and temperature ratings cover typical leakâtest conditions: up to 8.3 bar and 0Â°C to +71Â°C, adequate for most laboratory and industrial leak checks. - Medium-sized quick coupling and integrated valve simplify connection/disconnection and controlled isolation during testing. Considerations and limitations: - Confirm system operating pressure and temperature remain within the stated limits (â¤8.3 bar, 0â71Â°C). - EPDM is generally suitable for deionized water but verify against any aggressive additives, solvents or highâpurity requirements (e.g., ultraâpure water applications may require different elastomers or metal fittings to avoid contamination). - For very low leakârate detection or high vacuum/negative pressure tests, ensure the couplingâs sealing performance meets detection sensitivity; quick couplings can have higher permeation/leak paths than welded or compression fittings. - Check for compatibility with your fluid cleanliness standards and any regulatory/material traceability requirements. In summary: suitable for routine leak detection in deionized water systems within the specified pressure/temperature range and provided EPDM and polypropylene meet your purity and compatibility needs.

Raccord traversant pour flexible, avec vanne, polypropylène, série PLC DN 6,3

Informations complémentaires

Matériau	P – matériau (plastique)

Prise de raccord rapide de taille moyenne avec embout pour flexible, destinée aux installations de lavage, à la filtration d’eau déionisée, aux machines industrielles, à la détection de fuites, etc. Longueur L [mm] : longueur totale. Matière : polypropylène. Étanchéité : joint torique EPDM. Pression de service : jusqu’à 8,3 bar. Température de service : de 0°C à +71°C.

Liste des variantes de produit

Référence article	Nom de la variante du produit	DN	BAR	Disponibilité	Prix	Quantité	Actions	Catalogue
CC-PLV-28-PP	Embout PLC DN6,4 pour tuyau 1/4", avec valve, traversée de cloison, polypropylène	-	8.3	En stock	0 zł		Demande
CC-PLV-30-PP	Embout mâle PLC DN6,4 pour tuyau 3/8", avec valve, à cloison, en polypropylène	-	8.3	En stock	0 zł		Demande

Vous avez besoin d'une plus grande quantité de produits ou d'un devis personnalisé ?

Appelez-nous : +33 679 352 568 ou envoyez-nous un e-mail : wirthjeanpierre@aol.fr

Envoyer une demande

Prise de raccord rapide de taille moyenne avec embout pour flexible, destinée aux installations de lavage, à la filtration d’eau déionisée, aux machines industrielles, à la détection de fuites, etc. Longueur L [mm] : longueur totale. Matière : polypropylène. Étanchéité : joint torique EPDM. Pression de service : jusqu’à 8,3 bar. Température de service : de 0°C à +71°C.