Is the DN11.8 weldable quick connector for water, stainless steel (AISI 303/304L) suitable for both low and high pressure up to 200 bar at temperatures up to +100Â°C?

Yes. The DN11.8 weldable quick connector for water, stainless steel (AISI 303/304L) is specified for both low and high pressure applications, with a working pressure of up to 200 bar and an operating temperature up to +100Â°C. Its construction from AISI 303/304L stainless steel and design as a weldable quick coupling make it suitable for demanding water systems across that pressure and temperature range.

Does the DN11.8 weldable quick connector for water, stainless steel handle both low- and high-pressure systems up to 200 bar at +100Â°C?

Yes. The DN11.8 weldable quick connector for water, stainless steel is specified for both low- and high-pressure systems with a working pressure of 200 bar and an operating temperature up to +100Â°C. Its AISI 303/304L stainless steel construction and welding connection make it suitable for use across that pressure and temperature range.

Can the DN11.8 weldable quick connector for water, stainless steel (AISI 303/304L) be used at 200 bar and +100Â°C for varied pressure systems?

Yes. the DN11.8 weldable quick connector for water, stainless steel (AISI 303/304L) can be used at 200 bar and +100Â°C for varied pressure systems, provided the application stays within the specified working pressure (200 bar) and operating temperature (up to +100Â°C). The connectorâs construction from AISI 303/304L stainless steel supports corrosion resistance and mechanical strength suitable for many water applications at these conditions. However, ensure the following before installation: - System peaks or transients do not exceed 200 bar or +100Â°C. - Compatible seals and mating components are rated for 200 bar and +100Â°C. - Welding procedure and installation follow manufacturer guidelines to preserve integrity. - Fluid chemistry is compatible with AISI 303/304L and seal materials. - Regular inspection and maintenance are planned for varied-pressure operation. If any application conditions (temperature, pressure spikes, aggressive fluids, cyclic loading) are uncertain, consult the manufacturer or a qualified engineer for verification.

Embout mâle de raccord rapide pour eau DN11,8 à souder, acier inoxydable

Informations complémentaires

Matériau	SS – acier inoxydable

Embout mâle de raccord rapide DN11,8 avec raccord à souder, utilisé pour basse et haute pression. Matière : acier AISI 303/304L. Pression de service : 200 bar. Température de service : jusqu’à +100°C.

Liste des variantes de produit

Référence article	Nom de la variante du produit	DN	BAR	Disponibilité	Prix	Quantité	Actions	Catalogue
AK-ADAPW-11,5	Embout mâle de raccord rapide DN11,8 à souder, d=11,5 mm, acier inoxydable	-	200	En stock	0 zł		Demande

Vous avez besoin d'une plus grande quantité de produits ou d'un devis personnalisé ?

Appelez-nous : +33 679 352 568 ou envoyez-nous un e-mail : wirthjeanpierre@aol.fr

Envoyer une demande

Embout mâle de raccord rapide DN11,8 avec raccord à souder, utilisé pour basse et haute pression. Matière : acier AISI 303/304L. Pression de service : 200 bar. Température de service : jusqu’à +100°C.