Is the GW BSP twisted hydraulic end, carbon steel, DKR type S compatible with standard BSP-threaded hose assemblies and screwed sleeves?

Yes. The GW BSP twisted hydraulic end, carbon steel, DKR type S is compatible with standard BSP-threaded hose assemblies and screwed sleeves. It has an internal BSP thread and nut with a 60Â° sealing cone (DKR) specifically designed to be screwed into rubber and thermoplastic hoses using a screwed sleeve. Material and finish (carbon steel, galvanized) are typical for such connections, so it will mate with conventional BSP-threaded hose fittings and standard screwed sleeves intended for DKR-type 60Â° cone sealing.

Does the GW BSP twisted hydraulic end, carbon steel, DKR type S support use with metric-threaded hoses or adapters?

No - the GW BSP twisted hydraulic end, carbon steel, DKR type S Format is designed for internal BSP threads and a 60Â° sealing cone (DKR) to be used with screwed sleeves into rubber and thermoplastic hoses. It is intended for BSP-threaded connections and compatible screwed sleeves, not for metric-threaded hoses or adapters unless an appropriate BSP-to-metric adapter is fitted. Without such an adapter, metric-threaded components are not directly compatible.

Can the GW BSP twisted hydraulic end, carbon steel, DKR type S withstand typical hydraulic system pressures and temperatures?

Yes. in most typical hydraulic systems the GW BSP twisted hydraulic end, carbon steel, DKR type S can withstand standard operating pressures and temperatures, with some important caveats. Why itâs suitable - Design: The DKR type S screwed hydraulic end with a 60Â° sealing cone and internal BSP thread is a standard geometry for reliable metal-to-metal sealing when mated and torqued correctly. - Material: Carbon steel (galvanized) provides good strength and fatigue resistance for common hydraulic pressures and mechanical loads. - Use case: It is intended for installation into rubber and thermoplastic hoses using a screwed sleeve, a conventional assembly for medium- and high-pressure hose assemblies. Limitations and considerations - Pressure rating: The actual allowable working pressure depends on the hose, sleeve, and assembly method as well as thread engagement and torque. The fitting alone is typically capable of typical hose assembly pressures, but you must verify the system pressure against the assembled hose/fitting rated pressure provided by the hose manufacturer or product datasheet. - Temperature range: Carbon steel fittings perform well across common hydraulic fluid temperature ranges, but extreme low or high temperatures (below â40 Â°C or above ~120â150 Â°C depending on coating, seal materials and hose type) may require special materials or seals. Galvanization protects against corrosion but may degrade at elevated temperatures. - Sealing: The 60Â° cone requires proper mating surfaces and correct assembly torque to ensure leak-free operation; improper assembly can reduce pressure capability. - Compatibility: Ensure hydraulic fluid compatibility with galvanization and hose inner lining; aggressive fluids may need different materials. - Safety margin and standards: Use the manufacturerâs approved assembly procedure and ratings, and follow applicable hydraulic standards (e.g., ISO, SAE). For critical or extreme applications, choose fittings explicitly rated for the required pressure/temperature or consult the supplier. Conclusion The GW BSP twisted hydraulic end, carbon steel, DKR type S is appropriate for typical hydraulic system pressures and temperatures when used in a correctly matched, assembled, and rated hose assembly; confirm specific pressure and temperature limits from the hose/fitting datasheet and manufacturer guidance before use.

Embout hydraulique tournant GW BSP, acier au carbone, type DKR S

Informations complémentaires

Matériau	CS – acier (fonte)
Longueur standard [m]	15

Embout hydraulique vissé, type S, avec filetage interne BSP et écrou, cône d’étanchéité 60° (DKR). Conçu pour le vissage sur des flexibles en caoutchouc et thermoplastiques à l’aide d’une bague vissée. Matière : acier au carbone, galvanisé.

Liste des variantes de produit

Référence article	Nom de la variante du produit	DN	BAR	Disponibilité	Actions
TI-SBW110-02-025	Embout vissé femelle BSP 1/8" pour tuyau 5/32"	4	-	En stock	Demande
TI-SBW110-02-03	Embout à visser femelle BSP 1/8" pour tuyau 3/16"	5	-	En stock	Demande
TI-SBW110-04-025	raccord à visser femelle BSP 1/4" pour tuyau 5/32"	4	-	En stock	Demande
TI-SBW110-04-03	Raccord à visser femelle BSP 1/4" pour tuyau 3/16"	5	-	En stock	Demande
TI-SBW110-04-04	Embout à visser femelle BSP 1/4" pour tuyau 1/4"	6	-	En stock	Demande
TI-SBW110-04-05	Raccord à visser femelle BSP 1/4" pour tuyau 5/16"	8	-	En stock	Demande
TI-SBW110-06-04	Embout à visser femelle BSP 3/8" pour tuyau 1/4"	6	-	En stock	Demande
TI-SBW110-06-05	Embout à visser femelle BSP 3/8" pour tuyau 5/16"	8	-	En stock	Demande
TI-SBW110-06-06	Raccord final à visser femelle BSP 3/8" pour flexible 3/8"	10	-	En stock	Demande
TI-SBW110-08-08	Embout à visser femelle BSP 1/2" pour tuyau 1/2"	12	-	En stock	Demande
TI-SBW110-10-10	Embout à visser femelle BSP 5/8" pour tuyau 5/8"	16	-	En stock	Demande
TI-SBW110-12-12	Embout vissé femelle BSP 3/4" pour tuyau 3/4"	20	-	En stock	Demande
TI-SBW110-16-16	Embout vissé GW BSP 1" pour tuyau 1"	25	-	En stock	Demande
TI-SBW110-20-20	Embout à visser femelle BSP 1.1/4" pour tuyau 1.1/4"	32	-	En stock	Demande
TI-SBW110-24-24	Raccord à visser femelle BSP 1.1/2" pour tuyau 1.1/2"	38	-	En stock	Demande

Vous avez besoin d'une plus grande quantité de produits ou d'un devis personnalisé ?

Appelez-nous : +33 679 352 568 ou envoyez-nous un e-mail : wirthjeanpierre@aol.fr

Envoyer une demande

Embout hydraulique vissé, type S, avec filetage interne BSP et écrou, cône d’étanchéité 60° (DKR). Conçu pour le vissage sur des flexibles en caoutchouc et thermoplastiques à l’aide d’une bague vissée. Matière : acier au carbone, galvanisé.