Is the Pipe deburring device, type S01 suitable for both carbon steel and stainless steel pipes up to 42 mm diameter?

Yes. The Pipe deburring device, type S01 is suitable for both carbon steel and stainless steel pipes up to 42 mm diameter. The device is specifically designed for finishing pipe ends after cutting, removing burrs from both outer and inner edges, and its stated maximum pipe diameter is 42 mm.

Can Pipe deburring device, type S01 operate continuously at 230 V and 50 rpm without overheating?

Pipe deburring device, type S01 cannot be guaranteed to operate continuously at 230 V and 50 rpm without overheating based solely on the provided data. The specifications (230 V, 0.18 kW, 50 rpm, max Ã 42 mm) indicate low power and slow speed, which suggest modest thermal stress, but there is no information about duty cycle, cooling, thermal protection, or manufacturer guidance on continuous operation. Continuous use may be acceptable for light-duty deburring of small-diameter carbon or stainless steel pipes, yet risk of overheating rises with prolonged heavy loads, abrasive wear, clogged tooling or poor ventilation. To determine safe continuous operation, consult the manufacturerâs manual or supplier for duty cycle, recommended duty rating, and any required cooling/maintenance.

Does the Pipe deburring device, type S01 include adjustable blades for varying wall thicknesses?

Based on the provided description of Pipe deburring device, type S01, there is no explicit mention that the device includes adjustable blades for varying wall thicknesses. The description states the device is intended for finishing pipe ends after cutting (removal of burrs from outer and inner edges) and is designed for pipes of carbon and stainless steel up to 42 mm diameter, with technical data for voltage, power, speed, and weight. Since adjustable blades or a mechanism to vary blade position for different wall thicknesses are not specified, you should assume the device does not explicitly include that feature. If adjustable blades are required, verify with the manufacturer or supplier for confirmation or optional accessories.

Ébavureuse de tubes, type S01

Informations complémentaires

Longueur standard [m]	60

Appareil destiné à la finition des extrémités de tubes après la coupe (élimination des bavures sur l’arête extérieure et intérieure). Convient aux tubes en acier au carbone comme en acier inoxydable. Diamètre maximal du tube : 42 mm. Tension : 230 V. Puissance : 0,18 kW. Vitesse : 50 tr/min. Poids : 30 kg.

Liste des variantes de produit

Référence article	Nom de la variante du produit	DN	BAR	Disponibilité	Prix	Quantité	Actions	Catalogue
OP-RS01	Dispositif d’ébavurage des tubes S01	-	-	En stock	0 zł		Demande

Vous avez besoin d'une plus grande quantité de produits ou d'un devis personnalisé ?

Appelez-nous : +33 679 352 568 ou envoyez-nous un e-mail : wirthjeanpierre@aol.fr

Envoyer une demande

Appareil destiné à la finition des extrémités de tubes après la coupe (élimination des bavures sur l’arête extérieure et intérieure). Convient aux tubes en acier au carbone comme en acier inoxydable. Diamètre maximal du tube : 42 mm. Tension : 230 V. Puissance : 0,18 kW. Vitesse : 50 tr/min. Poids : 30 kg.