Can the Pneumatic diverter valve mechanically operated tappet, 3/2, 70 series be mounted in any position without affecting performance or sealing?

Yes. The Pneumatic diverter valve mechanically operated tappet, 3/2, 70 series can be mounted in any position without affecting performance or sealing. It is a universal mechanical control distribution valve operated by a push rod, designed for flexible installation. Construction materials (aluminum body, nickel-plated aluminum slider, NBR seals and plastic end cover) and rated working pressure up to 10 bar with operating temperature range â10Â°C to +60Â°C support reliable operation regardless of orientation.

Can the Pneumatic diverter valve mechanically operated tappet, 3/2, 70 series tolerate continuous operation at pressures near 10 bar without reduced lifespan?

Pneumatic diverter valve mechanically operated tappet, 3/2, 70 series is specified for a working pressure up to 10 bar. Continuous operation near the upper limit (around 10 bar) is possible but may shorten service life compared with operation at lower pressures. Materials (aluminum body, nickelâplated aluminum slider, NBR seals, plastic end cover) are common for this pressure range, but NBR seals can wear faster under constant high pressure, temperature extremes, or aggressive media. For reliable continuous-duty use at ~10 bar, ensure proper installation, clean/dry air, periodic inspection/replacement of seals, and confirm manufacturer guidance or endurance testing data. If maximum longevity is critical, consider derating below 10 bar or selecting a valve rated for continuous high-pressure service.

Does the Pneumatic diverter valve mechanically operated tappet, 3/2, 70 series require specific mounting orientation for optimum actuator response?

Pneumatic diverter valve mechanically operated tappet, 3/2, 70 series does not require a specific mounting orientation for optimum actuator response. According to the product description, it is a universal mechanical control distribution valve operated by a push rod and "can be mounted in any position." The valveâs constructionâaluminum body, nickel-plated aluminum slider, NBR seals and plastic end coverâplus its intended working pressure (up to 10 bar) and operating temperature range (-10Â°C to +60Â°C) support reliable performance regardless of orientation. However, for best long-term reliability and consistent actuation, follow these practical considerations: ensure the push rod and actuator alignment are correct to avoid side loads; protect the valve from excessive contamination or liquid ingress that could affect the slider or seals; and mount in a way that allows access for maintenance.

Distributeur pneumatique à commande mécanique par poussoir, 3/2, série 70

Tous les produits, Vannes pneumatiques/

Informations complémentaires

Température maximale de service [°C]	60
Température de service minimale [°C]	-10

Distributeur universel à commande mécanique, par poussoir, utilisé le plus souvent pour piloter des vérins. Il peut être monté dans n’importe quelle position. Fonction 3/2 – trois voies, deux positions. Taille : 1/8″. Matériau : corps du distributeur – aluminium, tiroir – aluminium nickelé, étanchéité – NBR, couvercle d’extrémité – matière plastique. Pression de service : jusqu’à 10 bar. Température de service : de -10°C à +60°C.

Liste des variantes de produit

Référence article	Nom de la variante du produit	DN	BAR	Disponibilité	Prix	Quantité	Actions	Catalogue
MW-7001000100	Valve série 70 MEV 23 TAS NC	-	10	En stock	0 zł		Demande

Vous avez besoin d'une plus grande quantité de produits ou d'un devis personnalisé ?

Appelez-nous : +33 679 352 568 ou envoyez-nous un e-mail : wirthjeanpierre@aol.fr

Envoyer une demande

Distributeur universel à commande mécanique, par poussoir, utilisé le plus souvent pour piloter des vérins. Il peut être monté dans n’importe quelle position. Fonction 3/2 – trois voies, deux positions. Taille : 1/8″. Matériau : corps du distributeur – aluminium, tiroir – aluminium nickelé, étanchéité – NBR, couvercle d’extrémité – matière plastique. Pression de service : jusqu’à 10 bar. Température de service : de -10°C à +60°C.