Is the Rubber cover for hose end, type GK compatible with DN8, DN10, and DN12 high-pressure cleaning hoses?

Yes. Rubber cover for hose end, type GK is compatible with standard high-pressure cleaning hoses DN8, DN10, and DN12. The thick rubber construction limits kinking at the hose end and enforces a larger minimum bending radius, making it suitable for those DN sizes. Available colors: blue, black, red, gray, yellow.

Can Rubber cover for hose end, type GK withstand chemical cleaners and detergents used in high-pressure cleaning?

Rubber cover for hose end, type GK is made of thick rubber designed to protect the hose end and limit kinking, intended for standard highâpressure cleaning hoses (DN8, DN10, DN12). While the description does not specify chemical resistance, typical rubber covers offer good mechanical protection but can vary in resistance to detergents and aggressive cleaning agents. For common alkaline or neutral detergents used in highâpressure cleaning, Rubber cover for hose end, type GK will generally tolerate exposure; however, prolonged contact with strong solvents, concentrated acids/alkalis, or aggressive chemical cleaners may degrade the material. Recommend checking manufacturer chemical compatibility data or testing the cover with the specific cleaner before prolonged use.

How do I install the Rubber cover for hose end, type GK onto DN8, DN10, or DN12 hoses?

How to install the Rubber cover for hose end, type GK onto DN8, DN10, or DN12 hoses 1. Prepare hose and cover - Clean the hose end so it is free of dirt, oil and moisture. - Select the Rubber cover for hose end, type GK in the correct inner size for your hose (DN8, DN10 or DN12) and desired color. 2. Preâcondition the cover (optional but recommended in cold weather) - Warm the cover slightly (hand warm or brief soak in warm water) to increase elasticity and make fitting easier. 3. Fit the cover - Slide the wider open end of the Rubber cover for hose end, type GK over the hose tip. - Push and stretch the cover down until it fully covers the hose end and extends over the last several centimeters of the hose jacket. - Ensure the reduced end seats firmly around the actual hose tip and that the thicker section aligns with the area where kinking prevention is required. 4. Final checks - Confirm the cover restricts the minimum bending radius at the hose end and that there are no twists or gaps. - If needed, rotate or reposition slightly so the cover sits evenly around the hose circumference. - For permanent or highâpressure applications, consider securing the cover with a hose clamp or adhesive rated for your hose material, ensuring clamp placement does not degrade the coverâs kinkâprevention function. The Rubber cover for hose end, type GK is designed to limit hose kinking and maintain bend radius on standard highâpressure cleaning hoses DN8, DN10 and DN12; proper seating and, where appropriate, light warming and optional clamping will ensure reliable performance.

Manchon de protection en caoutchouc pour embout de flexible, type GK

Informations complémentaires

Épais manchon de protection en caoutchouc limitant le risque de pliure du flexible au niveau de l’embout ainsi que le dépassement du rayon de courbure minimal. À utiliser avec les flexibles standards de lavage haute pression DN8, DN10 ou DN12. Couleur du manchon : bleu, noir, rouge, gris, jaune.

Liste des variantes de produit

Référence article	Nom de la variante du produit	DN	BAR	Disponibilité	Actions
EM-GKB-08	Gaine en caoutchouc DN8 (17/17 mm), bleue	-	-	En stock	Demande
EM-GKB-10	Gaine en caoutchouc DN10 (19,5/19,5 mm), bleue	-	-	En stock	Demande
EM-GKB-12	Gaine en caoutchouc DN12 (23/22,5 mm), bleue	-	-	En stock	Demande
EM-GKS-08	Gaine en caoutchouc DN8 (17/17 mm), noire	-	-	En stock	Demande
EM-GKS-10	Gaine en caoutchouc DN10 (19,5/19,5 mm), noire	-	-	En stock	Demande
EM-GKS-12	Gaine en caoutchouc DN12 (23/22,5 mm), noire	-	-	En stock	Demande
EM-GKY-10	Protection en caoutchouc DN10 (19,5/19,5 mm), jaune	-	-	En stock	Demande
EM-GKY-12	Protection en caoutchouc DN12 (23/22,5 mm), jaune	-	-	En stock	Demande

Vous avez besoin d'une plus grande quantité de produits ou d'un devis personnalisé ?

Appelez-nous : +33 679 352 568 ou envoyez-nous un e-mail : wirthjeanpierre@aol.fr

Envoyer une demande

Épais manchon de protection en caoutchouc limitant le risque de pliure du flexible au niveau de l’embout ainsi que le dépassement du rayon de courbure minimal. À utiliser avec les flexibles standards de lavage haute pression DN8, DN10 ou DN12. Couleur du manchon : bleu, noir, rouge, gris, jaune.