Is the Round nozzle for coolant, 3/4" system, JETON compatible with both 5/8" and 3/4" coolant hoses?

Yes. Round nozzle for coolant, 3/4" system, JETON Format is compatible with both 5/8" and 3/4" coolant hoses because the product is offered in those two sizes. Choose the nozzle size that matches your hose diameter (5/8" or 3/4") to ensure proper fit and seal; material (acetal) and working pressure (up to 1.4 bar) support typical coolant applications.

Can the Round nozzle for coolant, 3/4" system, JETON withstand continuous operation at +65Â°C without performance loss?

Yes. According to the product description, the Round nozzle for coolant, 3/4" system, JETON has an operating temperature rating "up to +65Â°C." That means it is specified to withstand continuous operation at +65Â°C without performance loss within the stated working parameters (material: acetal; working pressure: up to 1.4 bar). Ensure actual application does not exceed the given temperature, pressure, chemical exposure, or mechanical stresses; if any conditions approach limits, validate with testing or consult manufacturer.

Does the Round nozzle for coolant, 3/4" system, JETON resist common coolants and oils without degrading?

Round nozzle for coolant, 3/4" system, JETON is made of acetal (POM), which is a engineering thermoplastic known for good mechanical strength, dimensional stability and resistance to many oils and coolants. Within the specified operating conditions. working pressure up to 1.4 bar and temperature up to +65Â°C. acetal typically resists common water-based coolants, soluble cutting fluids and many light mineral oils without rapid degradation. However, acetal can be attacked by strong acids, strong bases, halogenated hydrocarbons, ketones (e.g., acetone) and some chlorinated solvents. Aggressive chemical additives, very high pH or temperatures above the stated +65Â°C may shorten service life or cause swelling, cracking or loss of mechanical properties. Practical guidance: for typical machining coolants and cutting oils used at temperatures â¤65Â°C and normal concentrations, Round nozzle for coolant, 3/4" system, JETON should perform well and resist degradation. If your fluid contains aggressive solvents, high concentrations of caustic additives, or operates above +65Â°C, verify compatibility with the fluid manufacturer or test a sample in service before prolonged use.

Buse ronde pour liquide de refroidissement, système 3/4″, JETON

Flexibles air et eau, Tous les produits/

Informations complémentaires

Buse ronde pour flexibles de liquide de refroidissement JETON – système 3/4″. Disponible en tailles 5/8″ et 3/4″. Matériau : acétal. Pression de service : jusqu’à 1,4 bar. Température de service : jusqu’à +65°C.

Liste des variantes de produit

Référence article	Nom de la variante du produit	DN	BAR	Disponibilité	Prix	Quantité	Actions	Catalogue
JT-86062	buse ronde 3/4" (système 3/4")	-	1.4	En stock	0 zł		Demande
JT-86063	Buse ronde 5/8" (système 3/4")	-	1.4	En stock	0 zł		Demande

Vous avez besoin d'une plus grande quantité de produits ou d'un devis personnalisé ?

Appelez-nous : +33 679 352 568 ou envoyez-nous un e-mail : wirthjeanpierre@aol.fr

Envoyer une demande

Buse ronde pour flexibles de liquide de refroidissement JETON – système 3/4″. Disponible en tailles 5/8″ et 3/4″. Matériau : acétal. Pression de service : jusqu’à 1,4 bar. Température de service : jusqu’à +65°C.