How do I adjust the flow on the Adjustable nozzle with regulated flow, with hose attachment, brass, and what hose sizes (15/20 mm) are compatible?

To adjust the flow on the Adjustable nozzle with regulated flow, with hose attachment, brass, rotate the nozzle body: turning it one way increases the spray/opening, the opposite direction reduces flow until a fine jet or shutoff. Regulation is continuous, allowing precise control between wash and spray modes. Connection and compatible hose sizes: the nozzle accepts standard hose ends with 15 mm or 20 mm inner diameter fittings (15/20 mm). Ensure your hose has a matching end fitting for a secure push-on or clamp connection; use appropriate hose clamps for pressure up to 25 bar. The nozzleâs brass construction supports durable use at working pressures up to 25 bar.

Can the Adjustable nozzle with regulated flow, with hose attachment, brass withstand continuous use at 25 bar and how does rotation affect durability?

Adjustable nozzle with regulated flow, with hose attachment, brass can withstand continuous use at 25 bar if used within its specified working pressure (up to 25 bar) and with proper installation (secure hose connection, compatible fittings, and stable water source). Continuous operation at the upper pressure limit may accelerate wear on seals and moving parts; regular inspection and maintenance (lubrication, seal replacement) are recommended to preserve performance. Rotation used for flow regulation is normal operation; however frequent or forceful rotation under pressure increases mechanical wear on the rotating interface and sealing surfaces, potentially shortening service life. Gentle, controlled rotation and avoiding operation above 25 bar will maximize durability.

Does the Adjustable nozzle with regulated flow, with hose attachment, brass come with a warranty and what does it cover?

Yes. the Adjustable nozzle with regulated flow, with hose attachment, brass typically comes with a manufacturerâs warranty. Coverage usually includes defects in materials and workmanship for a specified period (commonly 1â2 years), meaning the manufacturer will repair or replace the nozzle if it fails under normal use due to faulty brass casting, poor machining, or defective flow-regulation components. The warranty generally does not cover damage from misuse, freezing, chemical corrosion, excessive pressure beyond the stated working pressure (up to 25 bar), normal wear and tear (e.g., worn seals or threads), improper installation, or modifications. Consumable parts (like washers or O-rings) are often excluded unless specified. To make a claim youâll need proof of purchase and may be required to return the product for inspection; some retailers or manufacturers also cover shipping for warranty repairs while others do not. Exact warranty length, terms, and claim procedure depend on the seller or manufacturer, so check the included warranty card or contact the retailer for the specific conditions applicable to your Adjustable nozzle with regulated flow, with hose attachment, brass.

Buse réglable à débit régulé, avec raccord pour flexible, laiton

Informations complémentaires

Buse réglable à débit variable conçue pour la pulvérisation et le lavage. Le débit se règle par rotation. Raccordement : extrémité de flexible 15/20 mm. Pression de service : jusqu’à 25 bar. Matière : laiton.

Liste des variantes de produit

Référence article	Nom de la variante du produit	DN	BAR	Disponibilité	Prix	Quantité	Actions	Catalogue
NT-20000A4	Buse réglable 1/2", pour flexibles de 15 et 20 mm, en laiton	-	25	En stock	0 zł		Demande

Vous avez besoin d'une plus grande quantité de produits ou d'un devis personnalisé ?

Appelez-nous : +33 679 352 568 ou envoyez-nous un e-mail : wirthjeanpierre@aol.fr

Envoyer une demande

Buse réglable à débit variable conçue pour la pulvérisation et le lavage. Le débit se règle par rotation. Raccordement : extrémité de flexible 15/20 mm. Pression de service : jusqu’à 25 bar. Matière : laiton.