Is the Flat wide nozzle for coolant, 3/4" system, JETON suitable for continuous use at temperatures up to +65Â°C and pressures up to 1.4 bar?

Yes. Flat wide nozzle for coolant, 3/4" system, JETON Format is specified for continuous operation at temperatures up to +65Â°C and working pressures up to 1.4 bar, so it is suitable for those conditions.

Can the Flat wide nozzle for coolant, 3/4" system, JETON be used with acetal-compatible coolants at pressures up to 1.4 bar?

Yes. Flat wide nozzle for coolant, 3/4" system, JETON is made of acetal, specified for working pressures up to 1.4 bar and operating temperatures up to +65Â°C, so it is suitable for use with acetal-compatible coolants at pressures up to 1.4 bar.

Does the Flat wide nozzle for coolant, 3/4" system, JETON resist chemical exposure from common coolants at +65Â°C?

Flat wide nozzle for coolant, 3/4" system, JETON is made of acetal (POM) and rated for operation up to +65Â°C. Acetal offers good general chemical resistance to many common coolants and cutting fluids (water-based emulsions, soluble oils, light synthetic fluids) at ambient and moderately elevated temperatures. At the specified maximum operating temperature (+65Â°C) acetal retains much of its mechanical integrity and resists swelling and degradation in contact with typical coolants, so in most standard machining coolant applications it will resist chemical exposure reasonably well. However, chemical resistance depends on the exact coolant formulation and exposure conditions (concentration, pH, presence of strong alkalies, acids, chlorinated solvents, or aggressive additives), contact duration, and mechanical stress. Strong alkaline or acidic solutions, aggressive solvents (e.g., chlorinated hydrocarbons, ketones), or unusual additives can attack acetal, causing embrittlement, crazing or dimensional changeâespecially at elevated temperatures near the +65Â°C limit. Conclusion: For common water-based coolants, soluble oils and standard synthetics used in machining, Flat wide nozzle for coolant, 3/4" system, JETON should resist chemical exposure at +65Â°C. If the coolant contains strong acids, strong alkalis, aggressive solvents or proprietary additives, or if long-term exposure under stress is expected, verify compatibility with acetal (POM) by consulting coolant manufacturer data or performing exposure testing.

Buse plate large pour liquide de refroidissement, système 3/4″, JETON

Flexibles air et eau, Tous les produits/

Informations complémentaires

Buse plate large pour flexibles de liquide de refroidissement JETON – système 3/4″. Disponible en taille 3″. Matériau : acétal. Pression de service : jusqu’à 1,4 bar. Température de service : jusqu’à +65°C.

Liste des variantes de produit

Référence article	Nom de la variante du produit	DN	BAR	Disponibilité	Prix	Quantité	Actions	Catalogue
JT-86067	Buse plate à fente 77,3x4,8 mm (système 3/4")	-	1.4	En stock	0 zł		Demande

Vous avez besoin d'une plus grande quantité de produits ou d'un devis personnalisé ?

Appelez-nous : +33 679 352 568 ou envoyez-nous un e-mail : wirthjeanpierre@aol.fr

Envoyer une demande

Buse plate large pour flexibles de liquide de refroidissement JETON – système 3/4″. Disponible en taille 3″. Matériau : acétal. Pression de service : jusqu’à 1,4 bar. Température de service : jusqu’à +65°C.