Does the FULL-JET injector nozzle, plastic, series 269 with 2 mm hole and wide air stream double airflow at 2â8 bar while producing 90 dB noise?

Yes. The FULL-JET injector nozzle, plastic, series 269 with a 2 mm hole and wide air stream draws ambient air at an exceptionally high rate, effectively doubling the airflow within its operating pressure range of 2â8 bar, and it produces a noise level of 90 dB. Operating temperature range: -10Â°C to +50Â°C.

Can the FULL-JET injector nozzle, plastic, series 269 with 2 mm hole and wide air stream maintain doubled airflow across its -10Â°C to +50Â°C operating range?

Yes. The FULL-JET injector nozzle, plastic, series 269 with a 2 mm hole and wide air stream is specified to draw air from the environment at an exceptionally high flow rate, doubling the airflow. Its operating temperature range is given as â10Â°C to +50Â°C, and no temperature-dependent derating is stated. Therefore, within the specified operating range and at the stated operating pressures (2â8 bar), the nozzle can maintain the doubled airflow. Note: actual performance can vary with installation, ambient conditions and system pressure; verify in application if precise flow figures are critical.

Does the FULL-JET injector nozzle, plastic, series 269 with 2 mm hole and wide air stream require special mounting to sustain doubled airflow?

No special mounting is required for the FULL-JET injector nozzle, plastic, series 269 with a 2 mm hole and wide air stream to sustain the doubled airflow. The nozzle is designed to draw air from the environment at an exceptionally high flow rate at operating pressures between 2 and 8 bar, so normal installation that secures the plastic body and supplies stable compressed air is sufficient. Ensure proper support to avoid mechanical stress on the plastic housing, maintain correct hose fittings and pressure supply, and provide adequate ventilation around the nozzle to allow free ambient air intake. Also consider noise mitigation (rated 90 dB) and operating temperature limits (â10Â°C to +50Â°C) when choosing mounting location and any nearby personnel protection.

Buse à injecteur FULL-JET, plastique, série 269

Pistolets à air, Tous les produits/

Informations complémentaires

Buse à injecteur FULL-JET avec orifice de 2 mm de diamètre et large jet d’air, aspire l’air ambiant avec un débit exceptionnellement élevé, doublant le débit d’air. Niveau sonore : 90 dB. Matériau : plastique noir. Pression de service : 2 ÷ 8 bar. Température de service : de -10°C à +50°C.

Liste des variantes de produit

Référence article	Nom de la variante du produit	DN	BAR	Disponibilité	Prix	Quantité	Actions	Catalogue
EW-269K45	Buse injecteur Full-Jet, diamètre d’orifice 2 mm, filetage mâle M12x1,25, polyamide	-	10	En stock	0 zł		Demande

Vous avez besoin d'une plus grande quantité de produits ou d'un devis personnalisé ?

Appelez-nous : +33 679 352 568 ou envoyez-nous un e-mail : wirthjeanpierre@aol.fr

Envoyer une demande

Buse à injecteur FULL-JET avec orifice de 2 mm de diamètre et large jet d’air, aspire l’air ambiant avec un débit exceptionnellement élevé, doublant le débit d’air. Niveau sonore : 90 dB. Matériau : plastique noir. Pression de service : 2 ÷ 8 bar. Température de service : de -10°C à +50°C.