Can Plug plug (plug) with lock nut SKV, galvanized steel, type H be used in hydraulic systems with fluids compatible with NBR sealing?

Yes. Plug plug (plug) with lock nut SKV, galvanized steel, type H Format; zwykÅy tekst is described specifically as a closing element for use in hydraulic systems, made of galvanized steel with NBR (nitrile rubber) sealing. If the hydraulic fluid is compatible with NBR (nitrile rubber), the sealing material will resist swelling, hardening or degradation, so the plug can be used. Ensure operating temperatures and pressures remain within the NBR and galvanized steel limits (typical NBR temperature range â -40Â°C to +100Â°C; verify exact ranges with manufacturer) and confirm fluid compatibility for additives, high aromatic content or hot oxygenated fluids which can shorten NBR life. Also verify thread size, torque and lock-nut installation to maintain a proper seal.

Is Plug plug (plug) with lock nut SKV, galvanized steel, type H suitable for high-pressure hydraulic systems?

Plug plug (plug) with lock nut SKV, galvanized steel, type H Format is intended as a closing element for hydraulic systems, made of galvanized steel with NBR sealing. Whether it is suitable for high-pressure hydraulic systems cannot be determined from this description alone. Key missing information: maximum working pressure (PS), burst pressure, thread size and fit, temperature range, compatibility of NBR with the hydraulic fluid and operating temperatures, and relevant standards or certifications. Galvanized steel and NBR can be appropriate for moderate pressures, but for high-pressure applications specialized high-strength materials, fittings and seals rated for the specific pressure and fluid are required. Recommend obtaining the manufacturerâs pressure rating and material/temperature compatibility data before use in high-pressure systems.

Does Plug plug (plug) with lock nut SKV, galvanized steel, type H resist corrosion in marine hydraulic environments?

Plug plug (plug) with lock nut SKV, galvanized steel, type H Format; zwykÅy tekst. based on the provided description (material: galvanized steel; sealing: NBR), it is not suitable for reliable long-term use in marine hydraulic environments. Galvanized steel provides some corrosion resistance in mild conditions, but seawater and the humid, chloride-rich atmosphere of marine settings aggressively attack zinc coatings and underlying steel, leading to rapid pitting and coating breakdown. NBR (nitrile) seals offer good resistance to oils and hydraulic fluids but have limited resistance to prolonged exposure to saltwater, UV, and ozone compared with specialized elastomers (e.g., EPDM for water or FKM for aggressive media). For marine hydraulic applications, materials such as stainless steel (e.g., 316) or corrosion-resistant alloys and seals formulated for seawater are recommended. If short-term or infrequent, non-critical exposure to splashes or mildly corrosive atmospheres is expected and components are inspected and replaced regularly, the plug may be acceptable with protective maintenance; for continuous immersion or harsh marine service, choose a product specified for marine corrosion resistance.

Bouchon (plug) avec écrou de blocage SKV, acier galvanisé, type H

Informations complémentaires

Matériau	CS – acier (fonte)

Bouchon (capuchon) avec écrou de blocage SKV, en tant qu’élément de fermeture, pour utilisation dans les systèmes hydrauliques. Matière : acier galvanisé. Étanchéité : NBR.

Liste des variantes de produit

Référence article	Nom de la variante du produit	DN	BAR	Disponibilité	Actions
TI-SKV-F-H-12	Bouchon enfichable SKV type H 3/4	-	500	En stock	Demande
TI-SKV-F-H-16	Obturateur enfichable SKV type H 1	-	500	En stock	Demande
TI-SKV-F-H-20	Bouchon enfichable SKV type H 1.1/4	-	450	En stock	Demande
TI-SKV-F-H-24	Obturateur enfichable SKV type H 1 1/2	-	450	En stock	Demande
TI-SKV-F-H-32	Bouchon obturateur enfichable SKV type H 2	-	420	En stock	Demande

Vous avez besoin d'une plus grande quantité de produits ou d'un devis personnalisé ?

Appelez-nous : +33 679 352 568 ou envoyez-nous un e-mail : wirthjeanpierre@aol.fr

Envoyer une demande

Bouchon (capuchon) avec écrou de blocage SKV, en tant qu’élément de fermeture, pour utilisation dans les systèmes hydrauliques. Matière : acier galvanisé. Étanchéité : NBR.