Is the Coil 22 mm for 70 series valves with 1/8" and 1/4" size, Ã8 stem ATEX 94/9 CE certified for use in Zone 2/22 environments?

Yes. The Coil 22 mm for 70 series valves with 1/8" and 1/4" size, Ã8 stem is compliant with ATEX 94/9 CE, group II, category 3GD. Category 3GD equipment is intended for use in Zone 2 (gases) and Zone 22 (dusts). With IP65 protection and the stated insulation/voltage tolerances, this coil is certified for use in Zone 2/22 environments, provided it is installed and used according to the manufacturerâs instructions and any applicable system safety requirements.

Can Coil 22 mm for 70 series valves with 1/8" and 1/4" size, Ã8 stem be used safely in explosive atmospheres under ATEX 94/9 CE category 3GD?

Yes. Coil 22 mm for 70 series valves with 1/8" and 1/4" size, Ã8 stem Format is marked as compliant with ATEX 94/9/EC, group II, category 3GD and has IP65 protection with connector, insulation class F (155) and standard voltage tolerance. Category 3GD indicates equipment intended for use in atmospheres with potentially explosive gas (G) and dust (D) in zones where an explosive atmosphere is likely to occur only rarely and for short periods (Zone 2 for gas, Zone 22 for dust). Therefore, when installed and used according to manufacturer instructions and applicable local installation standards, Coil 22 mm for 70 series valves with 1/8" and 1/4" size, Ã8 stem Format can be used safely in ATEX category 3GD environments.

Does Coil 22 mm for 70 series valves with 1/8" and 1/4" size, Ã8 stem meet ATEX 94/9 CE group II category 3GD requirements?

Yes. Coil 22 mm for 70 series valves with 1/8" and 1/4" size, Ã8 stem Format meets ATEX 94/9/EC group II category 3GD requirements, as it is explicitly stated in the product description: "Compliant with ATEX 94/9 CE, group II, category 3GD." Additionally, the coilâs IP65 protection (with connector), insulation class F155, and stated voltage tolerance support safe operation in environments covered by category 3GD (zones where explosive gas and dust atmospheres are unlikely to occur or, if they do, exist only infrequently and for short periods).

Bobine 22 mm pour électrovannes série 70 avec taille 1/8″ et 1/4″, tige Ø8.

Informations complémentaires

Bobine 22 mm pour électrovannes série 70, tailles 1/8″ et 1/4″, plongeur Ø8. Classe d’isolation : F155. Tolérance de tension : -10 % à +15 %. Degré de protection : IP65 DIN 40050 avec connecteur. Conforme ATEX 94/9 CE, groupe II, catégorie 3GD.

Liste des variantes de produit

Référence article	Nom de la variante du produit	DN	BAR	Disponibilité	Actions
MW-W0215000101	Bobine 22 mm D8 BA 2 W 24 V DC (vannes série 70 et NAMUR)	-	-	En stock	Demande
MW-W0215000111	Bobine 22 mm D8 BA 3VA 24 V CA 50/60 Hz (vannes série 70 et NAMUR)	-	-	En stock	Demande
MW-W0215000121	Bobine 22 mm D8 BA 3VA 110 V AC 50/60 Hz (vannes série 70 et NAMUR)	-	-	En stock	Demande
MW-W0215000131	Bobine 22 mm D8 BA 3 VA 220 VCA 50/60 Hz (vannes série 70 et NAMUR)	-	-	En stock	Demande
MW-W0215000151	Bobine 22 mm D8 BA 2W 12V CC (vannes série 70 et NAMUR)	-	-	En stock	Demande

Vous avez besoin d'une plus grande quantité de produits ou d'un devis personnalisé ?

Appelez-nous : +33 679 352 568 ou envoyez-nous un e-mail : wirthjeanpierre@aol.fr

Envoyer une demande

Bobine 22 mm pour électrovannes série 70, tailles 1/8″ et 1/4″, plongeur Ø8. Classe d’isolation : F155. Tolérance de tension : -10 % à +15 %. Degré de protection : IP65 DIN 40050 avec connecteur. Conforme ATEX 94/9 CE, groupe II, catégorie 3GD.