Is the Band-ItÂ® Tie-LokÂ® system information label tape, AISI 304 steel, suitable for outdoor use and resistant to corrosion in marine environments?

Band-ItÂ® Tie-LokÂ® system information label tape, AISI 304 steel offers good general corrosion resistance and is suitable for many outdoor applications. AISI 304 stainless steel resists rust and oxidation under typical atmospheric conditions, resists wet environments and is durable for long-term use with a low-profile lock and smooth inner surface that helps prevent crevice corrosion. However, AISI 304 is not the optimal choice for harsh marine environments with constant salt spray, high chloride levels, or prolonged immersion. In such conditions pitting and crevice corrosion can occur over time; for superior long-term corrosion resistance in marine or highly chloride-exposed settings, AISI 316 (marine grade) is recommended. Summary: Band-ItÂ® Tie-LokÂ® system information label tape, AISI 304 steel is suitable for general outdoor use and offers good durability, but for prolonged exposure to marine or high-salinity environments choose a 316-grade option for better corrosion resistance.

How do I size and cut the Band-ItÂ® Tie-LokÂ® system information label tape, AISI 304 steel, for custom-length installations?

To size and cut the Band-ItÂ® Tie-LokÂ® system information label tape, AISI 304 steel, for custom-length installations, measure the required loop length around the object plus overlap for the low-profile lock. Add 1â2 in (25â50 mm) as allowance for insertion and securing. Mark the tape at the final cut point; use aviation snips, metal shears, or a fine-tooth hacksaw to cut cleanly. File any sharp edges and deburr the cut end to ensure smooth insertion into the Tie-LokÂ® lock and prevent label damage. For narrow installations use the 1/4" width to fit tight spaces while maintaining durability and a secure hold. Test-fit before final installation.

Can the Band-ItÂ® Tie-LokÂ® system information label tape, AISI 304 steel, withstand high temperatures during installation or operation?

The Band-ItÂ® Tie-LokÂ® system information label tape, AISI 304 steel, offers good general corrosion resistance and mechanical strength typical of 304 stainless steel, but the product description (Mounting tape for information plates of the Band-ItÂ® Tie-LokÂ® system, made of AISI 304 steel. Durable, secure, with a low-profile lock and smooth inner surface. Tape width: 1/4". Material: AISI 304 steel.) does not specify temperature ratings for installation or operation. Practical implications: - AISI 304 stainless steel maintains structural integrity and resists oxidation at typical elevated service temperatures up to roughly 300â400Â°C (572â752Â°F); short-term exposure can tolerate higher temperatures but may reduce corrosion resistance and mechanical properties. - The Band-ItÂ® Tie-LokÂ® systemâs low-profile lock and any nonmetallic components (if present in labels or plate adhesives) could impose lower temperature limits than the steel itself. - For high-temperature installations (e.g., continuous exposure above ~200â300Â°C or thermal cycling), confirm compatibility with any attached plates, adhesives, or surrounding materials and check for possible loss of temper or discoloration. Recommendation: If your application involves elevated or extreme temperatures, contact the manufacturer or supplier for explicit temperature ratings and guidance, or provide the expected temperature range so they can verify suitability.

Bande pour plaques d’information du système Band-It® Tie-Lok®, acier AISI 304

Système de serrage à bande, Tous les produits/

Informations complémentaires

Matériau	SS – acier inoxydable

Bande pour le montage des plaques d’information du système Band-It® Tie-Lok®, en acier AISI 304. Résistante, sûre, avec une fermeture à profil bas et une surface intérieure lisse. Largeur de la bande : 1/4″. Matière : acier AISI 304.

Liste des variantes de produit

Référence article	Nom de la variante du produit	DN	BAR	Disponibilité	Actions
BD-AS2119	Ruban pour plaques d’information, largeur 1/4", L = 254 mm, AISI 304	-	-	En stock	Demande
BD-AS2129	Ruban pour plaques d’information, largeur 1/4", L = 419 mm, AISI 304	-	-	En stock	Demande
BD-AS2139	Ruban pour plaques d’information, largeur 1/4", L = 572 mm, AISI 304	-	-	En stock	Demande
BD-AS2149	Ruban pour plaques d’information, largeur 1/4", L = 737 mm, AISI 304	-	-	En stock	Demande
BD-AS2159	Ruban pour plaques d’information, largeur 1/4", L = 889 mm, AISI 304	-	-	En stock	Demande

Vous avez besoin d'une plus grande quantité de produits ou d'un devis personnalisé ?

Appelez-nous : +33 679 352 568 ou envoyez-nous un e-mail : wirthjeanpierre@aol.fr

Envoyer une demande

Bande pour le montage des plaques d’information du système Band-It® Tie-Lok®, en acier AISI 304. Résistante, sûre, avec une fermeture à profil bas et une surface intérieure lisse. Largeur de la bande : 1/4″. Matière : acier AISI 304.