Is Band-ItÂ® Ball-LokÂ® tape, partially coated, AISI 316 steel suitable for marine environments exposed to salt spray and UV?

Yes. Band-ItÂ® Ball-LokÂ® tape, partially coated, AISI 316 steel is suitable for marine environments exposed to salt spray and UV. The tapeâs base material, AISI 316 stainless steel, offers excellent resistance to pitting and crevice corrosion in chloride-rich (salt) conditions. The partial epoxy coating increases corrosion protection further, is halogen-free and non-toxic, and helps shield the metal where applied. The product description also states high resistance to corrosion and UV radiation, and it tolerates wide temperature ranges, making it appropriate for outdoor marine use. For best long-term performance in continuous immersion or extremely aggressive environments, consider full-coating or additional protective measures and verify compatibility with your specific exposure conditions and installation method.

Can Band-ItÂ® Ball-LokÂ® tape, partially coated, AISI 316 steel withstand prolonged exposure to high temperatures and flames?

Yes. Band-ItÂ® Ball-LokÂ® tape, partially coated, AISI 316 steel is designed for prolonged exposure to high temperatures and flames. The partially epoxy-coated AISI 316 construction provides excellent corrosion resistance and the product description specifies high resistance to fire, UV, and both high and low temperatures. The epoxy coating is non-toxic and halogen-free, and the stainless AISI 316 base metal maintains mechanical integrity at elevated temperatures better than lower-grade steels. For precise maximum service temperatures, duration of flame exposure, or application-specific limits, consult the manufacturerâs technical sheet or test data.

Does Band-ItÂ® Ball-LokÂ® tape, partially coated, AISI 316 steel resist chemical exposure (acids, solvents)?

Yes. Band-ItÂ® Ball-LokÂ® tape, partially coated, AISI 316 steel offers good resistance to many chemicals. AISI 316 stainless steel itself is highly resistant to corrosion from a wide range of acids, alkalis and solvents due to its molybdenum content, making it suitable for marine and chemical environments. The partial epoxy coating further increases corrosion protection, provides a non-toxic, halogen-free barrier, and helps protect the underlying metal from aggressive agents and UV exposure. The product description also notes high resistance to fire, corrosion, UV radiation, and extreme temperatures, which supports durability in chemically challenging conditions. Limitations: No coating is universally impervious. Strong oxidizing acids (e.g., concentrated nitric acid), some halogenated solvents, and highly chlorinated or strongly reducing environments can still attack stainless steels or degrade coatings over time. The coating is partial, so exposed steel edges, cut areas or mechanically stressed zones may be more vulnerable. For continuous immersion, high concentrations, elevated temperatures, or critical applications, verify compatibility with the specific chemical, concentration and temperature, and consider full-coating or alternative materials if needed. Conclusion: For general exposure to common acids and solvents, Band-ItÂ® Ball-LokÂ® tape, partially coated, AISI 316 steel performs well; for aggressive or continuous chemical exposure, confirm compatibility with specific chemicals and service conditions before use.

Bande Band-It® Ball-Lok® partiellement revêtue, acier AISI 316

Système de serrage à bande, Tous les produits/

Informations complémentaires

Matériau	SS – acier inoxydable

Collier auto-serrant à revêtement époxy partiel (protection renforcée contre la corrosion, matériau non toxique, sans halogènes), destiné à un montage manuel facile et simple ou à l’aide d’un outil de tension et de coupe (référence : BD-KE9229). Haute résistance au feu, à la corrosion, aux rayons UV ainsi qu’aux hautes et basses températures. Matière : acier AISI 316.

Liste des variantes de produit

Référence article	Nom de la variante du produit	DN	BAR	Disponibilité	Actions
BD-KE0618	Collier de serrage autobloquant Ball-Lok, largeur 4,6 mm, L=150 mm, partiellement revêtu, AISI 316	-	-	En stock	Demande
BD-KE0628	Collier de serrage autobloquant Ball-Lok, largeur 4,6 mm, L=201 mm, partiellement revêtu, AISI 316	-	-	En stock	Demande
BD-KE0638	Collier de serrage autobloquant Ball-Lok, largeur 4,6 mm, L=259 mm, partiellement revêtu, AISI 316	-	-	En stock	Demande
BD-KE0648	Collier de serrage autobloquant Ball-Lok, largeur 4,6 mm, L=360 mm, partiellement revêtu, AISI 316	-	-	En stock	Demande
BD-KE0658	Collier de serrage autobloquant Ball-Lok, largeur 4,6 mm, L=520 mm, partiellement revêtu, AISI 316	-	-	En stock	Demande
BD-KE0668	Collier de serrage autobloquant Ball-Lok, largeur 4,6 mm, L=679 mm, partiellement revêtu, AISI 316	-	-	En stock	Demande
BD-KE0678	Collier de serrage autobloquant Ball-Lok, largeur 4,6 mm, L=838 mm, partiellement revêtu, AISI 316	-	-	En stock	Demande
BD-KE0828	Collier de serrage autobloquant Ball-Lok, largeur 7,9 mm, L=201 mm, partiellement revêtu, AISI 316	-	-	En stock	Demande
BD-KE0838	Collier de serrage autobloquant Ball-Lok, largeur 7,9 mm, L=259 mm, partiellement revêtu, AISI 316	-	-	En stock	Demande
BD-KE0848	Collier de serrage autobloquant Ball-Lok, largeur 7,9 mm, L=360 mm, partiellement revêtu, AISI 316	-	-	En stock	Demande
BD-KE0858	Collier de serrage autobloquant Ball-Lok, largeur 7,9 mm, L=520 mm, partiellement revêtu, AISI 316	-	-	En stock	Demande
BD-KE0868	Collier de serrage autobloquant Ball-Lok, largeur 7,9 mm, L=679 mm, partiellement revêtu, AISI 316	-	-	En stock	Demande
BD-KE0878	Collier de serrage autobloquant Ball-Lok, largeur 7,9 mm, L=838 mm, partiellement revêtu, AISI 316	-	-	En stock	Demande

Vous avez besoin d'une plus grande quantité de produits ou d'un devis personnalisé ?

Appelez-nous : +33 679 352 568 ou envoyez-nous un e-mail : wirthjeanpierre@aol.fr

Envoyer une demande

Collier auto-serrant à revêtement époxy partiel (protection renforcée contre la corrosion, matériau non toxique, sans halogènes), destiné à un montage manuel facile et simple ou à l’aide d’un outil de tension et de coupe (référence : BD-KE9229). Haute résistance au feu, à la corrosion, aux rayons UV ainsi qu’aux hautes et basses températures. Matière : acier AISI 316.