Can the Twisted sleeve for thermoplastic hoses OL5, VE5, carbon steel, type SOL5 be used with fittings other than TI-S series from the same supplier?

Based on the product description, the Twisted sleeve for thermoplastic hoses OL5, VE5, carbon steel, type SOL5 is specified for use only with a screwed fitting from the same supplier (TI-S series). That indicates it was designed, tested and certified as a matched component with TI-S fittings. Using it with other suppliersâ fittings or different fitting series could result in improper fit, seal failure, loss of mechanical integrity or voiding of any warranty or certification. Therefore you should not use the SOL5 twisted sleeve with fittings other than the specified TI-S series from the same supplier unless you obtain explicit written confirmation from the supplier that an alternative fitting is compatible and approved.

Is the Twisted sleeve for thermoplastic hoses OL5, VE5, carbon steel, type SOL5 compatible with other suppliers' screwed fittings?

No. The Twisted sleeve for thermoplastic hoses OL5, VE5, carbon steel, type SOL5 is designed to be used only with a screwed fitting from the same supplier (TI-S...). It is not specified as compatible with other suppliers' screwed fittings.

Does Twisted sleeve for thermoplastic hoses OL5, VE5, carbon steel, type SOL5 require TI-S series screwed fittings only?

No. Twisted sleeve for thermoplastic hoses OL5, VE5, carbon steel, type SOL5 should be used only with a screwed fitting from the same supplier (TI-S series) according to the product description. That means SOL5 is intended to be paired with TIâS screwed fittings supplied by the same manufacturer to ensure compatibility and proper performance.

Manchon torsadé pour flexibles thermoplastiques OL5, VE5, acier au carbone, type SOL5

Informations complémentaires

Matériau	CS – acier (fonte)
Longueur standard [m]	10

Manchon vissé pour flexibles thermoplastiques type OL5 ou VE5. À utiliser uniquement avec un raccord vissé du même fournisseur (TI-S…). Matière : acier au carbone, galvanisé.

Liste des variantes de produit

Référence article	Nom de la variante du produit	DN	BAR	Disponibilité	Actions
TI-SOL5-025	Douille pour tuyau thermoplastique OL5/VE5 5/32" (4x8 mm)	4	-	En stock	Demande
TI-SOL5-03	Douille pour flexible thermoplastique OL5/VE5 3/16	5	-	En stock	Demande
TI-SOL5-04	Douille pour flexible thermoplastique OL5/VE5 1/4	6	-	En stock	Demande

Vous avez besoin d'une plus grande quantité de produits ou d'un devis personnalisé ?

Appelez-nous : +33 679 352 568 ou envoyez-nous un e-mail : wirthjeanpierre@aol.fr

Envoyer une demande

Manchon vissé pour flexibles thermoplastiques type OL5 ou VE5. À utiliser uniquement avec un raccord vissé du même fournisseur (TI-S…). Matière : acier au carbone, galvanisé.