Is the ULTRACLEAN abrasive plug for hoses and pipes compatible with all hose materials and inner diameters within the 6â110 mm range?

The ULTRACLEAN abrasive plug for hoses and pipes is designed to operate across an inner diameter range of 6â110 mm, but compatibility with all hose materials is not guaranteed by the description. The product is intended for removing scale, rust and other deposits by being propelled through the hose or pipe with compressed air, so suitability depends on: - Inner diameter: the plug is available across the 6â110 mm range, so you must select the correct plug diameter to match the hose inner diameter for proper sealing and propulsion. - Hose material and condition: softer or more delicate inner linings (certain plastics, rubbers, coatings) may be damaged by an abrasive plug; very rigid or heavily corrugated surfaces may affect plug travel and cleaning effectiveness. - Geometry and fittings: bends, valves, couplings or abrupt diameter changes can impede the plug or cause damage. Recommendation: verify material compatibility and choose the exact plug diameter for your hose; if in doubt, consult the manufacturer or run a test on a sample section before full use.

Can the ULTRACLEAN abrasive plug for hoses and pipes be safely used with food-grade or silicone-lined hoses?

The ULTRACLEAN abrasive plug for hoses and pipes is designed to remove scale, rust and contaminants by being propelled through the hose or pipe with compressed air. Because it is an abrasive cleaning item, it can be aggressive to lining materials. It is not recommended for use with food-grade or silicone-lined hoses unless the manufacturer explicitly confirms compatibility: abrasive action can damage food-grade surfaces or silicone liners, contaminate product contact surfaces, or breach regulatory hygiene requirements. Before use, consult the hose or liner supplier and perform a risk assessment and test on a spare section; if compatibility cannot be confirmed, use non-abrasive cleaning methods or plugs specifically certified for food-contact and silicone-lined systems.

How quickly does the ULTRACLEAN abrasive plug for hoses and pipes remove different types of buildup?

The ULTRACLEAN abrasive plug for hoses and pipes removes buildup quickly and effectively, with speed depending on the type and thickness of the deposit, pipe diameter, and air pressure used. Typical performance: - Light deposits (thin film of sediment, soft organic fouling): removed within a single pass or a few passes; cleaning often completed in seconds to a minute per meter. - Moderate buildup (scale, light rust, mixed sediments): removed in a few passes; cleaning typically takes a few minutes per meter under recommended air pressure. - Heavy or compacted deposits (thick calcified scale, heavy corrosion layers): require multiple passes and higher air pressure; removal time ranges from several minutes to longer, depending on severity and plug diameter. - Soft contaminants and loose particles: cleared almost immediately as the plug displaces debris while propelled. - Irregular or adhesive residues: progress may be slower; repeated passes improve results. Smaller-diameter plugs (6â20 mm) are faster for short runs and tight spaces but may need more passes in heavily encrusted tubes. Larger-diameter plugs (above ~50 mm) cover more surface per pass and can be quicker in larger pipes. Overall throughput is optimized by choosing the correct plug diameter for the hose/pipe and using appropriate compressed-air settings. Bulk packaging availability does not affect cleaning speed.

Bouchon abrasif ULTRACLEAN pour flexibles et tubes

Autres dispositifs, Tous les produits/

Informations complémentaires

Matériau	P – matériau (plastique)
Longueur standard [m]	10, 2, 3, 4

Bouchon de nettoyage pour flexibles et tubes destiné aux appareils ULTRACLEAN. Utilisé là où une couche de tartre, de rouille ou d’autres contaminants s’accumule sur la surface interne des flexibles et des tubes. Le nettoyage s’effectue en propulsant le bouchon à l’aide d’air comprimé. Plage de diamètres disponible : 6 à 110 mm. Possibilité de vente en conditionnement vrac (le nombre de pièces par emballage dépend du diamètre extérieur du bouchon).

Liste des variantes de produit

Référence article	Nom de la variante du produit	DN	BAR	Disponibilité	Actions
UC-A006	Bouchon de nettoyage A 6 mm	-	-	En stock	Demande
UC-A007	Bouchon de nettoyage A 7 mm	-	-	En stock	Demande
UC-A010	Bouchon de nettoyage A 10 mm	-	-	En stock	Demande
UC-A012	Bouchon de nettoyage A 12 mm	-	-	En stock	Demande
UC-A014	Bouchon de nettoyage A 14 mm	-	-	En stock	Demande
UC-A016	Bouchon de nettoyage A 16 mm	-	-	En stock	Demande
UC-A018	Bouchon de nettoyage A 18 mm	-	-	En stock	Demande
UC-A020	Bouchon de nettoyage A 20 mm	-	-	En stock	Demande
UC-A022	Bouchon de nettoyage A 22 mm	-	-	En stock	Demande
UC-A024	Bouchon de nettoyage A 24 mm	-	-	En stock	Demande
UC-A026	Bouchon de nettoyage A 26 mm	-	-	En stock	Demande
UC-A028	Bouchon de nettoyage A 28 mm	-	-	En stock	Demande
UC-A030	Bouchon de nettoyage A 30 mm	-	-	En stock	Demande
UC-A033	Bouchon de nettoyage A 33 mm	-	-	En stock	Demande
UC-A036	Bouchon de nettoyage A 36 mm	-	-	En stock	Demande
UC-A040	Bouchon de nettoyage A 40 mm	-	-	En stock	Demande
UC-A045	Bouchon de nettoyage A 45 mm	-	-	En stock	Demande
UC-A050	bouchon de nettoyage A 50 mm	-	-	En stock	Demande
UC-A055	Bouchon de nettoyage A 55 mm	-	-	En stock	Demande
UC-A060	bouchon de nettoyage A 60 mm	-	-	En stock	Demande
UC-A065	Bouchon de nettoyage A 65 mm	-	-	En stock	Demande
UC-A070	Bouchon de nettoyage A 70 mm	-	-	En stock	Demande
UC-A075	Bouchon de nettoyage A 75 mm	-	-	En stock	Demande
UC-A080	Bouchon de nettoyage A 80 mm	-	-	En stock	Demande
UC-A085	Bouchon de nettoyage A 85 mm	-	-	En stock	Demande
UC-A090	Bouchon de nettoyage A 90 mm	-	-	En stock	Demande
UC-A095	Bouchon de nettoyage A 95 mm	-	-	En stock	Demande
UC-A100	Bouchon de nettoyage A 100 mm	-	-	En stock	Demande
UC-A110	Bouchon de nettoyage A 110 mm	-	-	En stock	Demande

Vous avez besoin d'une plus grande quantité de produits ou d'un devis personnalisé ?

Appelez-nous : +33 679 352 568 ou envoyez-nous un e-mail : wirthjeanpierre@aol.fr

Envoyer une demande

Bouchon de nettoyage pour flexibles et tubes destiné aux appareils ULTRACLEAN. Utilisé là où une couche de tartre, de rouille ou d’autres contaminants s’accumule sur la surface interne des flexibles et des tubes. Le nettoyage s’effectue en propulsant le bouchon à l’aide d’air comprimé. Plage de diamètres disponible : 6 à 110 mm. Possibilité de vente en conditionnement vrac (le nombre de pièces par emballage dépend du diamètre extérieur du bouchon).